AIzaSyBMJLehm8j6j0La8w7yFA5HiR9WVNS8rHc

Technical Data Sheets

Safety Data Sheets

Finish

85° = < 10.0. Sheen levels depend on porosity and various surface irregularities.

Best for use in

Ideal for use in offices, schools, dining areas, apartments and other areas that are sensitive to solvent odors or high odor levels.

Coverage

27.87-37 m2 per 3.79 L depending on the surface texture, porosity and application method. It Does not include the loss of material from spraying.

PRODUCT USAGE
  • Ideal for use in offices, schools, dining areas, apartments and other areas which are sensitive to solvent odors or high odor levels. Use KILZ ORIGINAL LOW ODOR Primer to block stains including water, tannin and smoke from tobacco and fire.
  • Not recommended for floors.

Surface Preparation†

  • All surfaces must be clean, free of dust, chalk, oil, grease, wax, polish, mold and mildew, loose peeling paint, rust and all other foreign substances.
  • If washing is necessary, use a non-soapy detergent or a TSP substitute, rinse well and allow to dry.
  • †Glossy Surfaces: For maximum adhesion, scuff sand the surface thoroughly before priming.*
  • Peeling or Checked Paint: Scrape off loose paint and sand to a smooth surface.*
  • Mold or Mildew Covered Surfaces: Wash the area with a mildew remover, rinse with water and allow to dry before priming. Note: KILZ PREMIUM and KILZ 2® Primers are recommended for mildew-prone surfaces.
  • Masonry, Brick, Stucco and Plaster: KILZ ORIGINAL LOW ODOR Primer may be used on clean, dry, aged masonry surfaces. New masonry must be allowed to cure (dry) at least 30 days before applying KILZ ORIGINAL LOW ODOR Primer.

Read More

Application

  • Eye protection is recommended. Do not thin. Stir thoroughly before and occasionally during use. Apply using a brush, roller or sprayer. Any slight odor that is detected during application will diminish quickly.
  • Use product when painting surface and air temperatures are between 2°C and 32°C.
  • Brush – High quality Nylon/Polyester
  • Roller – High quality 3/8-1/2 " nap on smooth surfaces or 1/2-3/4" nap on semi-rough or porous surfaces.
  • Airless spray – .015-.019 tip / 60 mesh filter Prime the entire surface to ensure a uniform appearance of the topcoat.
  • Stainblocking: After priming, test for stain bleed-through by applying the topcoat to a small section. If the stain bleeds through the topcoat, apply a second coat of primer and test again before topcoating the entire area. If bleeding continues, a longer dry time is needed before topcoating.
  • Tinting: Up to 2 ounces of universal colourant per gallon. Tinting to a lighter shade than topcoat is recommended.
  • Coverage: 27.87-37 m2 per 3.79 L depending on application method and surface porosity.

Read More

Dry Time at 25°C, 50% RH

  • Dries to the touch in 30 minutes
  • Recoat or topcoat after 1 hour

Read More

Clean-Up & Disposal

  • Clean equipment and paint spatters with warm, soapy water. If spilled, contain material and remove with an inert absorbent. Dispose of contaminated absorbent, container and unused product in accordance with all current federal, state and local regulations.
  • Do not dispose of this product down a drain. Please consider donating any unused product. For recycling or disposal information contact your local household refuse collection service.
  • To consult with a KILZ Certified Coatings Professional, call 1-866-PRIMER-1 (U.S.A. only).

Read More

Read More

WARRANTY

For one year from the date of purchase, Masterchem Industries LLC warrants to the original residential consumer purchaser (1) that the product meets Masterchem Industries LLC’s manufacturing specifications, and (2) the performance of this product when applied according to the label instructions and specifications. In the event that this product proves to be defective within one year from the date of purchase, Masterchem Industries LLC will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. This warranty is not transferable. This warranty excludes (1) labor and costs of labor for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. To the extent permitted by applicable law, any implied warranties including the implied warranties of merchantability and of fitness for a particular purpose, are limited to the duration of this express warranty.  Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state. Note to residents of the State of New Jersey: The provisions of this warranty, including its limitations, are intended to apply to the fullest extent permitted by the laws of the State of New Jersey. For warranty service, call: 1-866-774-6371, or email: techservice@masterchem.com. Masterchem Industries LLC reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.

Read More

Reviews

Pro Contractor wearing a cap and shirt with Behr

PAINTING CONTRACTORS

Professional products and services specifically designed for residential and commercial painting contractors.

FOR CONTRACTORS
A small image of a Property Manager showing a BEHR PRO Rep a multi-family complex. The property manager is pointing at something while the BEHR PRO Rep is looking at what she is pointing and taking notes on a laptop.

PROPERTY & FACILITY MANAGERS

A full range of products and services to help property and facility managers enhance and maintain the appearance of properties.

FOR PROPERTY MANAGERS

READY TO GET STARTED?

Contact a Behr Pro Rep Icon

CONTACT A BEHR PRO® REP

Your reputation depends on your ability to do the job right. BEHR can help.

Find a rep
Technical Services Icon

TECHNICAL SERVICES

1-800-661-1591
Mon - Fri, 6am-3pm PST
Sat. & Sun., Closed

PRO XTRA logo

JOIN THE HOME DEPOT® PRO XTRA LOYALTY PROGRAM

Get 10% - 20% Back in Quarterly Rewards
BEHR® Paints, Stains & Primers.

sign up on homedepot.ca