BEHR® Masonry, Stucco & Brick Paint - Satin
A high-quality, satin acrylic latex paint with excellent hiding properties. This interior/exterior, self-priming, mildew-resistant finish provides excellent adhesion & water repellency on properly prepared interior/exterior smooth, rough & textured masonry, stucco & brick surfaces. This water-based formula is designed to accentuate all textured surfaces while achieving a natural look. It is alkali-resistant, easy to apply, lasts 20 years in all climatic conditions and cleans up with soap & water.
Click Here to see available colours.
Finish
Satin Finish
Best For Use In
Properly prepared Interior or Exterior vertical surfaces
Coverage
7-12 m2
PRODUCT USAGE
-
2-3 HR Dry Time
4 HR Recoat Time -
Spread Rate:
Rough: 23-28 m2
Smooth: 37 m2
Coverage per Gallon -
Soap & Water
Clean-Up -
Protect
from Freezing
Properly prepared Interior or Exterior vertical surfaces such as: Stucco, Masonry, Concrete, Concrete Block and Brick as well as adjacent Wood and Metal. Not for use on horizontal surfaces subject to foot traffic.
Preparation
- Allow new stucco and masonry to cure for 30 days before painting.
- Remove all loose, peeling paint. Powerwash to remove chalk. Remove dirt and grease with a product such as BEHR PREMIUM® NO. 990 Concrete & Masonry Degreaser & Cleaner.
- Remove mildew stains with a mildew stain removing product.
- On galvanized metal, use a diluted solution of a product such as BEHR PREMIUM NO. 991 Concrete & Masonry Cleaner & Etcher to prepare the surface. Follow all label instructions. Rinse thoroughly and allow a minimum of 24 hours to dry.
- Cracks and gaps wider than 1/16" (1.5 mm) should be routed open, dusted and patched with a quality patching compound. Use an acrylic caulk around windows, doors and trim. Scuff sand glossy surfaces.
- If chalk remains on the surface, prime with a product such as BEHR PREMIUM PLUS® NO. 436 Exterior Multi-Surface Primer & Sealer.
- Prime all patched areas as well as adjacent wood and metal surfaces.
- If previously sealed or coated, check manufacturer's specifications before painting.
Read More
Application
- DO NOT THIN.
- Intermix all cans of same product to ensure color uniformity. Stir paint before and occasionally during application.
- Use product when air and surface temperature are 50-90˚F (10-32˚C). Do not use if rain or heavy dew is expected within 24 hours.
- Apply using a high quality 3/4"-1" nap roller, nylon/polyester brush or airless sprayer (.015"-.017" spray tip).
- Apply a second coat, if necessary. Maintain a wet edge to avoid lap marks.
- Do not re-spread or re-work paint.
Read More
Dry Time
- Longer dry time required in cooler temperatures and higher humidity.
- After two weeks, cured paint film may be cleaned with a mild, non-abrasive liquid detergent.
Read More
Disposal
- Properly dispose of all soiled rags.
- For disposal of empty containers and unused product contact your household refuse collection service.
Read More
Read More
Reviews
How-To
Find step-by-step instructions in our how-to articles and videos.
WARRANTY
LIMITED WARRANTY: Behr Paint Company warrants to you, the original residential consumer purchaser, the performance of this product as described on this label for 20 years from the date of purchase. THIS WARRANTY IS NOT VALID WHEN THE PRODUCT IS NOT PROPERLY APPLIED TO A PROPERLY PREPARED, VERTICAL SURFACE OR CARED FOR IN ACCORDANCE WITH THE LABEL DIRECTIONS. This warranty is not transferable. If this product is found not to perform as specified on the label during the warranty period, Behr Paint Company will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. The clause of limitation of liability which follows is inapplicable in Quebec. THIS WARRANTY EXCLUDES (1) LABOUR AND COSTS OF LABOUR FOR THE APPLICATION OR REMOVAL OF ANY PRODUCT, AND (2) ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES, WHETHER BASED ON BREACH OF EXPRESS OR IMPLIED WARRANTY, NEGLIGENCE, STRICT LIABILITY OR ANY OTHER LEGAL THEORY. The above provisions are not intended to operate where prohibited by law. This limited warranty is the only warranty provided by Behr Paint Company unless extended by a provincial consumer statute. To obtain warranty service, call 1-800-661-1591, or contact Behr Paint Company at 110-600 Barlow Square S.E., Calgary, AB T2C 5T7. Behr Paint Company reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.
