A great looking finish begins with the right start. Following the proper prep procedures will dramatically affect the look and longevity of your finished project.
For Best Results:
For expert guidance on prepping your uncoated pavers, brick or natural stone surfaces, refer to our how-to steps below.
For your safety, please wear protective clothing, eye goggles, and acid-resistant rubber gloves and footwear.
High Pressure Nozzle
Make sure the surface is clean. Wipe up all excess oil and grease spills. Scrape and sweep away dirt and other loose contaminants from the surface.
Clean and degrease the surface using a plastic watering can. This will evenly distribute the product. Work the Degreaser and Cleaner into the surface using a stiff bristled, non-metal brush or broom. Allow the product to remain on the surface for 10-20 minutes then vigorously scrub the surface. DO NOT allow the surface to dry.
Rinse the surface thoroughly with fresh water, while scrubbing at the same time to properly remove remaining residue. Pressure wash for best results.
TIP: After application, thoroughly saturate surrounding grass and plants with fresh water.
Remove excess water with a non-metal squeegee or mop. Prevent all rinse solution from entering the storm drains. Once the surface is clean and dry, it can be sealed.
Inside or outside; paint or stain: Let’s figure out how much you’ll need to make amazing happen.
CalculateEvery project is unique: Keep small wrinkles from becoming big problems by letting the Behr Technical Experts lend a hand.
Get Expert HelpSo many colours and so many ideas: Visit Behr’s Colour Studio for inspiration, colour tools, design advice and everything you need to find your project’s perfect colour.
Colour Studio