BEHR DYNASTY® Interior Matte
BEHR DYNASTY® Paint & Primer Interior Matte is our most advanced interior paint. A high-performance paint & primer◊, BEHR DYNASTY is everything you want in a paint all rolled into one, repelling stains and resisting scuffs with the one-coat coverage◆ you expect from our most premium paint line. Combined with our BEHR DYNASTY & MARQUEE® One-Coat Colour Collection colour options, BEHR DYNASTY delivers our toughest durability to provide you with a worry-free painting experience. Learn More.
Now comes with the new SIMPLE POUR Lid. Read about how this innovative lid helps you and get our best tips for using it.
◊A primer coat may be needed on some surfaces. See back label for details.
◆Valid only when tinted to colours from the BEHR DYNASTY® & MARQUEE® Interior One-Coat Hide Colour Collection. Learn more.
Finish
A matte sheen has a flat, low-reflective finish that's easy to clean, touches up well and will also hide minor surface imperfections.
Best For Use In
Ideal for Every Room
Coverage
Up to 37 m2
PRODUCT USAGE
-
1 HR Dry Time
2 HR Recoat Time -
Up to 37 m2
Coverage -
Soap & Water
Clean-Up -
Protect
from Freezing
Ideal for every room and provides a durable low luster reflective finish.
Preparation
- Properly prepare and clean all surfaces.
- Remove loose paint, wash off dirt and grease with detergent, rinse and allow to dry.
- Remove mildew stains with a mildew stain remover.
- Scuff sand glossy surfaces and repair imperfections. Remove all dust with a damp cloth, allow to dry.
- Allow new stucco, plaster and masonry to cure for 30 days before painting.
- Use BEHR DYNASTY Paint as a primer for uncoated, porous or repaired interior surfaces, including woods that contain tannins (two primer coats required for redwood and cedar).
STAINED SURFACES:
- Lock in stains with BEHR DYNASTY Paint as a spot primer.
- For heavy stains, test for stain bleed-through by applying BEHR DYNASTY Paint to a small section.
- If the stain bleeds through, spot prime with another coat to the stained area and test again before topcoating.
- If bleeding continues, a longer dry time is needed before topcoating.
Read More
Application
- Apply when air and surface temperatures are between 10-32°C.
- Stir paint occasionally. Intermix containers of the same product to ensure colour and sheen uniformity.
- Use a high-quality 10-13 mm nap roller cover, nylon/polyester brush, or an airless sprayer (.015 - .019" spray tip, 60 mesh filter).
- Do not thin if using a roller or brush; however, if using a sprayer and thinning is required, thin with water at a rate of no more than 237 ml per 3.75 L.
- Fully saturate roller for best coverage.
- Untinted ULTRA PURE WHITE® and colours outside of the BEHR DYNASTY & MARQUEE Interior One-Coat Colour Collection may require more than one coat to achieve complete hide and a uniform finish.
- Darker colours may require additional dry time.
- Longer dry time required in cooler temperatures and higher humidity.
- After 1 week, cured paint film may be cleaned with a mild, non-abrasive liquid detergent
- Dry paint film is mildew resistant.
- Do not use on floors.
Read More
Disposal
- For disposal of empty containers, unused paint and soiled rags, contact your household refuse collection service.
Read More
To consult with a Behr Company Representative, call 1-800-661-1591
Read More
Read More
Reviews
Compare Behr Sheens
- High Traffic Areas
- Family Rooms / Living Rooms / Bedrooms
- Dining Rooms / Offices
- Kids’ Rooms / Hallways
- Kitchens / Bathrooms
- Doors / Windows / Shutters
- Cabinets / Trim / Furniture
How-To
Find step-by-step instructions in our how-to articles and videos.
WARRANTY
LIFETIME LIMITED WARRANTY: Behr Paint Company warrants to you, the original residential consumer purchaser, the performance of this product as described on this label for so long as you reside in your home. THIS WARRANTY IS NOT VALID WHEN THE PRODUCT IS NOT PROPERLY APPLIED TO A PROPERLY PREPARED SURFACE OR CARED FOR IN ACCORDANCE WITH THE LABEL DIRECTIONS. This warranty is not transferable. If this product is found not to perform as specified on the label during the warranty period, Behr Paint Company will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. The clause of limitation of liability which follows is inapplicable in Quebec: This warranty excludes (1) labour and costs of labour for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. To the extent permitted by applicable law, any implied warranties including the implied warranties of merchantability and of fitness for a particular purpose, are limited to the duration of this express warranty. The above provisions are not intended to operate where prohibited by law. This limited warranty is the only warranty provided by Behr Paint Company unless extended by a provincial consumer statute. To obtain warranty service, call 1-800-661-1591 or contact Behr Paint Company at 110-600 Barlow Square S.E., Calgary, AB T2C 5T7. Behr Paint Company reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.
