AIzaSyBMJLehm8j6j0La8w7yFA5HiR9WVNS8rHc
6Lcwsf8UAAAAAJybOtreqf2wUsJvuhHt298f4zrc
previous page Back
Close up image of patterned cracking in the surface of the paint film resembling the scales of an alligator.

Causes

  • Failure to adequately prepare surface by removing all previous efflorescence.
  • Excess moisture escaping through the exterior masonry walls from the inside.
  • Failure to prime new concrete and masonry surface.

Solutions

  • If excess moisture is the cause, eliminate the source by repairing the roof, cleaning out gutters and downspout, and sealing any cracks in the masonry with high quality, water-based all-acrylic or siliconized acrylic caulk. If moist air is originating inside the building, consider installing vents or exhaust fans, especially in kitchen, bathroom and laundry areas.
  • Remove the efflorescence and all other loose material with a wire brush, power brush or power washer; then thoroughly rinse the surface. There are also commercially-available efflorescence removers that can be used for easy removal of efflorescence.
  • Apply a quality water-based or solvent-based masonry primer & sealer and allow it to dry completely; then apply a coat of top quality exterior house paint, masonry paint or elastomeric wall coating. (Elastomeric wall coatings should not be applied to surfaces that may have excessive moisture coming through, such as soil retaining walls, uncapped walls or interior basement walls).

READY TO GET STARTED?

Contact a Behr Pro Rep Icon

CONTACT A BEHR PRO® REP

Your reputation depends on your ability to do the job right. BEHR can help.

Find a rep
Technical Services Icon

TECHNICAL SERVICES

1-800-661-1591
Mon - Fri, 6am-3pm PST
Sat. & Sun., Closed

PRO XTRA logo

JOIN THE HOME DEPOT® PRO XTRA LOYALTY PROGRAM

Get 10% - 20% Back in Quarterly Rewards
BEHR® Paints, Stains & Primers.

sign up on homedepot.ca