BEHR® Multi-Surface Stain-Blocking Primer & Sealer No. 436
For a versatile primer that's excellent for stain-blocking, adhesion and sealing Interior/Exterior surfaces, choose BEHR Multi-Surface Stain-Blocking Primer & Sealer. This 100% styrene acrylic formula resists medium to heavy stains, and can even be used on metal, aluminum and to cover old oil-based paint. It's also tintable, so it's great when you're looking to make a colour change. This is also a low odor, low VOC formula.
Safety Data Sheets
Finish
Dries to a non-reflective sheen which minimizes the appearance of minor surface imperfections.
Best for use in
Over properly prepared uncoated and previously painted interior/exterior surfaces.
Coverage
23-37 m2 per 3.79 L
-
30 Min Dries to Touch
1 HR Ready to Topcoat -
23-37 m2
Coverage per 3.79 L -
Soap & Water
Clean-Up -
Protect
from Freezing
- Over properly prepared uncoated and previously painted Interior/Exterior surfaces.
- Ideal for Masonry, Stucco, Drywall, Galvanized Metal, Ferrous Metals, Vinyl, Aluminum, Wood, Concrete and on glossy surfaces or oil-based paint.
Preparation
- All surfaces should be properly prepared and cleaned.
- Remove loose paint, wash off chalk, dirt, and grease with detergent, rinse and allow to dry.
- Remove mildew stains with a mildew stain removing product.
- Scuff sand glossy and metal surfaces and repair imperfections.
- Remove all dust with a damp cloth, allow to dry.
- Allow new masonry stucco, concrete, concrete masonry units (CMUs), and split-faced block to cure for 7 days and test pH prior to applying primer.
- The pH must be 13.0 or lower before coating.
- Remove efflorescence with a mixed solution of one part vinegar and one part water, rinse thoroughly with clean water and allow to dry.
- FOR EXTERIOR SURFACES: For new or uncoated wood, use a product such as BEHR PREMIUM® No. 63 All-In-One Wood Cleaner.
- Etch galvanized metal with a concrete and masonry cleaner and etcher.
Read More
Application†
- Apply when air and surface temperatures are between 10-32°C.
- Use a high quality 10-13 mm nap roller cover, nylon/polyester brush or an airless sprayer (.015-.021" spray tip, 60 mesh filter).
- Stir primer occasionally.
- Do not thin if using a roller or brush; however, if using a sprayer and thinning is required, thin with water at a rate of no more than 284 ml per 3.78L.
- Spot prime patched areas first, then follow with a complete primer coat.
- Two coats may be needed over heavy stains and tannin-rich wood.
- On stained surfaces, topcoat in 4 hours; for heavy stains, topcoat in 16 hours.
- Topcoat within 30 days.
- Bright or deep colours require a tinted primer.
- Have primer tinted close to topcoat colour with no more than 118 ml of colourant per 3.78L.
- †On stained surfaces, topcoat in 4 hours, for heavy stains, topcoat in 16 hours.
Read More
Disposal
- For disposal of empty containers, unused paint and soiled rags, contact your household refuse collection service.
Read More
To consult with a Behr Company Representative, call 1-800-661-1591.
Read More
Read More
WARRANTY
Behr Process LLC warrants to you, the original residential consumer purchaser, the performance of this product as described on this label for so long as you reside in your home. THIS WARRANTY IS NOT VALID WHEN THE PRODUCT IS NOT PROPERLY APPLIED TO A PROPERLY PREPARED SURFACE OR CARED FOR IN ACCORDANCE WITH THE LABEL DIRECTIONS. This warranty is not transferable. If this product is found not to perform as specified on the label during the warranty period, Behr Process LLC will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. This warranty excludes (1) labor and costs of labor for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state. To obtain warranty service, call 1-800-854-0133. Behr Process LLC reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.
Read More
Reviews
PAINTING CONTRACTORS
Professional products and services specifically designed for residential and commercial painting contractors.
FOR CONTRACTORS
PROPERTY & FACILITY MANAGERS
A full range of products and services to help property and facility managers enhance and maintain the appearance of properties.
FOR PROPERTY MANAGERSREADY TO GET STARTED?
CONTACT A BEHR PRO® REP
Your reputation depends on your ability to do the job right. BEHR can help.
Find a rep
JOIN THE HOME DEPOT® PRO XTRA LOYALTY PROGRAM
Get 10% - 20% Back in Quarterly Rewards
BEHR® Paints, Stains & Primers.
About Interior Paint Sheens
Get the look you want and the protection you need for any room in your home.
A flat sheen has a non-reflective finish that touches up well and hides minor surface imperfections.
Low-traffic areas; interior walls and ceilings
Ceilings
Medium-Low
A matte sheen has a low-luster, reflective finish that is durable, easy to clean, touches up well and also hides minor surface imperfections.
Low-traffic areas; interior walls
Family rooms, living rooms, kids' rooms, bathrooms, dining rooms, ceilings
Medium
An eggshell enamel sheen has a soft, velvety appearance that resists dirt and grime, as well as mildew.
Moderate-traffic areas
Family rooms, living rooms, bedrooms, kids' rooms, hallways, dining rooms
Medium
A satin enamel sheen has a pearl-like finish that's easy to clean.
All interior surfaces; moderate- to high-traffic areas
Family rooms, living rooms, bedrooms, kids' rooms, hallways, kitchens, bathrooms, doors, windows, trim, cabinets, shutters, interior furniture
Medium-High
A semi-gloss enamel sheen is sleek and radiant resisting mildew, moisture and wear.
Cabinets and trim; high-traffic, high-moisture areas
Kids' rooms, hallways, kitchens, bathrooms, doors, windows, trim, cabinets, shutters
High
Hi-Gloss enamel sheens provide have a brilliant, shiny appearance and a durable, glass-like finish that allows dirt and grime to be wiped clean.
High-use surfaces
Kitchens, bathrooms, doors, windows, trim, cabinets, shutters, interior furniture
High
About Exterior Paint Sheens
Set the right curb appeal with exterior painting efforts that last.
A flat sheen is non-reflective, and easy to apply and touch up. It will minimize the appearance of minor surface imperfections.
Wood and vinyl walls and siding; brick and other masonry; fences
Medium-Low
A satin enamel sheen creates a pearl-like finish that's durable and dirt-resistant. It will also resist moisture, fading and stains.
Virtually all exterior surfaces
Medium-High
A semi-gloss enamel sheen is sleek and radiant with a hard, durable finish. It is formulated to withstand wear, and will also resist moisture, fading and stains.
Doors, trim and shutters; Exterior furniture
High
Hi-Gloss enamel sheen have a brilliant, shiny appearance and a durable, glass-like finish that allows dirt and grime to be wiped clean.
High-use surfaces
High
- Free Same-Day, Next-Day Delivery*
- Call, Text, or Email Your Paint Order
- Will Call & Schedule Deliveries
- Custom Color Matching
- Product & Record Order Management
- Expert Paint Knowledge
- Free Same-Day, Next-Day Delivery*
- Call, Text, or Email Your Paint Order
- Will Call & Schedule Deliveries
- Custom Color Matching
- Product & Record Order Management
- Expert Paint Knowledge
- Get 10%-20% back in quarterly rewards on BEHR® Products when you join Home Depot's Pro Xtra™ loyalty program
- Call, Text or E-mail your orders to your dedicated BEHR PRO Paint Specialist
- Arrange will call & Schedule Deliveries for pick-up at your Home Depot location or for delivery to you
