AIzaSyBMJLehm8j6j0La8w7yFA5HiR9WVNS8rHc
6Lcwsf8UAAAAAJybOtreqf2wUsJvuhHt298f4zrc

Technical Data Sheets

Finish

Provides a rich initial luster and is available in the colours of Clear, Cedar Naturaltone, Redwood, and Chocolate. *Not all colours available in all markets.

Best For Use In

For properly prepared new to slightly weathered, unsealed exterior wood surfaces (0-5 years exposure) such as; Decks, Railings, Shakes, Shingles, Siding, Fences, and Wood Patio Furniture.

Coverage

28-32 m2 per 3.79 L

PRODUCT USAGE
  • Paint prep icon

    Must Prep
    Before Applying
    Wood Finish

  • Pad applicator icon.

    1 Coat 
    Application

  • Concrete square feet coverage icon

    Spread Rate
    Coverage 23-28 m2

  • Mineral Spirits Icon

    Clean-Up
    Mineral Spirits or
    Paint Thinner

Recommended for properly prepared new to slightly weathered, unsealed exterior wood surfaces (0-5 years exposure) such as; Decks, Railings, Shakes, Shingles, Siding, Fences, and Wood Patio Furniture.

Preparation

Proper surface preparation is required.

  • For failing coatings or to remove loose wood fibers, use a product such as BEHR PREMIUM® No. 64 Wood Stain & Finish Stripper followed by BEHR PREMIUM No. 63 All-In-One Wood Cleaner to neutralize the wood.
  • When No. 64 is not needed, a product such as No. 63 MUST be used to remove mill glaze and clean the wood surface.
  • After using either No. 64 or No. 63, rinse thoroughly with a garden hose or pressure washer.
  • When rinsing with a pressure washer, use the broadest spray pattern while keeping the nozzle at least 24" away from the surface. Allow the area to dry at least 24 hours before coating.
  • Lightly sand to remove remaining wood fibers/fuzz.

Read More

Application

For best results, a pad applicator is recommended over large deck areas.

  • Must apply between 5-32˚C.
  • Avoid applying in direct sunlight or to hot surfaces. Do not use if rain is expected within 24 hours.
  • The surface must be completely dry before application. Intermix multiple containers to ensure colour uniformity.
  • DO NOT THIN PRODUCT. Stir product occasionally throughout application.
  • Test product for penetration and colour on a small hidden area before proceeding.
  • Use a natural bristle brush for areas requiring more accuracy. Use of rollers should be limited to rough surfaces only. Use 10 mm nap or longer when appropriate.
  • Lightly saturate the surface and back-brush any excess finish by using pad applicator.
  • Be sure to eliminate puddling and evenly distribute the finish.
  • Maintain a wet edge when applying. Apply product end-to-end or to board lengths to prevent lap marks.
  • Avoid applying finish too heavily. One coat application.
  • For optimum performance, coat all accessible sides.

Read More

MAINTENANCE

  • When colour has faded and water is readily absorbed by the substrate, prep/clean with a product such as BEHR PREMIUM No. 63, allow to dry, and apply a new/fresh coat of wood finish.
  • Product can be applied annually if needed.

Read More

Dry Time

  • Dry to touch after 2-4 hours depending on wood porosity.
  • 24-48 hours before foot traffic. 72 hours for full cure.

Read More

Disposal

  • For disposal of empty containers and unused product, contact your household refuse collection service.

Read More

To consult with a Behr Certified Coatings Professional, call 1-800-661-1591.

Read More

Read More

WARRANTY

For one year from the date of purchase, Behr Process LLC warrants to the original consumer purchaser, (1) that the product meets Behr Process LLC’s manufacturing specifications, and (2) the performance of this product when applied according to the label instructions and specifications. If this product is found not to perform as specified on the label within one year from the date of purchase, Behr Process LLC will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. The clause of limitation of liability which follows is inapplicable in Québec. THIS WARRANTY EXCLUDES (1) LABOUR AND COSTS OF LABOUR FOR THE APPLICATION OR REMOVAL OF ANY PRODUCT, AND (2) ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES, WHETHER BASED ON BREACH OF EXPRESS OR IMPLIED WARRANTY, NEGLIGENCE, STRICT LIABILITY OR ANY OTHER LEGAL THEORY. TO THE EXTENT PERMITTED BY APPLICABLE LAW, ANY IMPLIED WARRANTIES INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND OF FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THIS EXPRESS WARRANTY. The above provisions are not intended to operate where prohibited by law. This limited warranty is the only warranty provided by Behr Process LLC unless extended by a provincial consumer statute. To obtain warranty service, call 1-800-661-1591, or contact Behr Process LLC at 110-600 Barlow Square S.E., Calgary, AB T2C 5T7. Behr Process LLC reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.

Read More

Reviews

Pro Contractor wearing a cap and shirt with Behr

PAINTING CONTRACTORS

Professional products and services specifically designed for residential and commercial painting contractors.

FOR CONTRACTORS
A small image of a Property Manager showing a BEHR PRO Rep a multi-family complex. The property manager is pointing at something while the BEHR PRO Rep is looking at what she is pointing and taking notes on a laptop.

PROPERTY & FACILITY MANAGERS

A full range of products and services to help property and facility managers enhance and maintain the appearance of properties.

FOR PROPERTY MANAGERS

READY TO GET STARTED?

Contact a Behr Pro Rep Icon

CONTACT A BEHR PRO® REP

Your reputation depends on your ability to do the job right. BEHR can help.

Find a rep
Technical Services Icon

TECHNICAL SERVICES

1-800-661-1591
Mon - Fri, 6am-3pm PST
Sat. & Sun., Closed

PRO XTRA logo

JOIN THE HOME DEPOT® PRO XTRA LOYALTY PROGRAM

Get 10% - 20% Back in Quarterly Rewards
BEHR® Paints, Stains & Primers.

sign up on homedepot.ca