BEHR PREMIUM® ALL-IN-ONE WOOD CLEANER NO. 63
Whether you're preparing your deck for a stain or finish, or just doing regular maintenance, BEHR PREMIUM All-In-One Wood Cleaner gives you the cleaning power you need to restore your deck's natural beauty. It's tough enough for stains caused by mold mildew, ketchup and wine, but gentle enough that it won't damage your wood surface.
Safety Data Sheets
FINISH
Leaves your wood looking clean and restored with it's natural colour.
BEST FOR USE IN
Exterior Wood & Composites, Decks, Siding, Shakes, Shingles, Fences & Patio Furniture, Vinyl & Aluminum Siding, Masonry, Stucco and Concrete.
COVERAGE
Full Strength: 18 m2
Diluted: 36 m2
-
Coverage:
Full Strength
18 m2
Diluted
36 m2 -
Keep Surface Wet
During Use -
Soap & Water
Clean-Up
Exterior Wood & Composites, Decks, Siding, Shakes, Shingles, Fences & Patio Furniture, Vinyl & Aluminum Siding, Masonry, Stucco and Concrete.
- Removes exterior stains caused by mold, mildew, algae & fungus. Removes household stains such as BBQ Sauce, Ketchup, Wine, etc. Neutralizes wood surface after stripping. Restores the wood to its natural colour.
Preparation
The following steps and products are recommended for best results.
- Be sure to have a source for water, hose with nozzle and stiff bristle broom or brush.
- Wear protective clothing, goggles, acid resistant gloves.
- Always use BEHR PREMIUM® NO. 63-N All-In-One Wood Cleaner after application of BEHR PREMIUM® NO. 64 Wood Stain & Finish Stripper.
- Prevent all rinse solution from entering storm drains.
Read More
Application
- Must apply between 4.5-32˚C.
- Shake well before use. Conduct a small test patch in an inconspicuous area to ensure product performance.
- Be sure that the plastic mixing container is large enough to hold up to 2 gallons of diluted solution.
- DO NOT MIX IN METAL CONTAINER. Dilute 1 part of product with 1 part tap water (1:1 dilution) in a clean plastic container.
- To remove rust, tannin bleed, red clay stains and for extremely hard to clean weathered wood surfaces, use product at full strength.
- Wet surfaces with water prior to cleaning. Apply solution liberally with a pump sprayer, brush, mop or roller. Keep the surface completely wet with solution for 10-15 minutes.
- Scrub surface using a stiff bristle broom or brush. The solution will foam.
- After scrubbing, rinse thoroughly with water at normal pressure, or use a pressure washer at low setting (500-1200 PSI). DO NOT USE HIGH PRESSURE as this may harm the wood.
- Surfaces other than wood may be dulled if not rinsed off quickly.
Read More
Disposal
Biodegradable. Properly dispose of all soiled rags. To recycle or properly dispose of paint in your community, contact your household refuse collection service.
Read More
To consult with a Behr Certified Coatings Professional, call 1-800-661-1591.
Read More
Read More
WARRANTY
For one year from the date of purchase, Behr Process LLC warrants to the original consumer purchaser, (1) that the product meets Behr Process LLC’s manufacturing specifications, and (2) the performance of this product when applied according to the label instructions and specifications. If this product is found not to perform as specified on the label within one year from the date of purchase, Behr Process LLC will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. The clause of limitation of liability which follows is inapplicable in Québec. This warranty excludes (1) labour and costs of labour for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. To the extent permitted by applicable law, any implied warranties including the implied warranties of merchantability and of fitness for a particular purpose, are limited to the duration of this express warranty. The above provisions are not intended to operate where prohibited by law. This limited warranty is the only warranty provided by Behr Process LLC unless extended by a provincial consumer statute. To obtain warranty service, call 1-800-854-0133 ext. 2, or contact Behr Process LLC at 110-600 Barlow Square S.E. Calgary, Alberta T2C 5T7. Behr Process LLC reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.
Read More
Reviews
PAINTING CONTRACTORS
Professional products and services specifically designed for residential and commercial painting contractors.
FOR CONTRACTORS
PROPERTY & FACILITY MANAGERS
A full range of products and services to help property and facility managers enhance and maintain the appearance of properties.
FOR PROPERTY MANAGERSREADY TO GET STARTED?
CONTACT A BEHR PRO® REP
Your reputation depends on your ability to do the job right. BEHR can help.
Find a rep
JOIN THE HOME DEPOT® PRO XTRA LOYALTY PROGRAM
Get 10% - 20% Back in Quarterly Rewards
BEHR® Paints, Stains & Primers.
About Interior Paint Sheens
Get the look you want and the protection you need for any room in your home.
A flat sheen has a non-reflective finish that touches up well and hides minor surface imperfections.
Low-traffic areas; interior walls and ceilings
Ceilings
Medium-Low
A matte sheen has a low-luster, reflective finish that is durable, easy to clean, touches up well and also hides minor surface imperfections.
Low-traffic areas; interior walls
Family rooms, living rooms, kids' rooms, bathrooms, dining rooms, ceilings
Medium
An eggshell enamel sheen has a soft, velvety appearance that resists dirt and grime, as well as mildew.
Moderate-traffic areas
Family rooms, living rooms, bedrooms, kids' rooms, hallways, dining rooms
Medium
A satin enamel sheen has a pearl-like finish that's easy to clean.
All interior surfaces; moderate- to high-traffic areas
Family rooms, living rooms, bedrooms, kids' rooms, hallways, kitchens, bathrooms, doors, windows, trim, cabinets, shutters, interior furniture
Medium-High
A semi-gloss enamel sheen is sleek and radiant resisting mildew, moisture and wear.
Cabinets and trim; high-traffic, high-moisture areas
Kids' rooms, hallways, kitchens, bathrooms, doors, windows, trim, cabinets, shutters
High
Hi-Gloss enamel sheens provide have a brilliant, shiny appearance and a durable, glass-like finish that allows dirt and grime to be wiped clean.
High-use surfaces
Kitchens, bathrooms, doors, windows, trim, cabinets, shutters, interior furniture
High
About Exterior Paint Sheens
Set the right curb appeal with exterior painting efforts that last.
A flat sheen is non-reflective, and easy to apply and touch up. It will minimize the appearance of minor surface imperfections.
Wood and vinyl walls and siding; brick and other masonry; fences
Medium-Low
A satin enamel sheen creates a pearl-like finish that's durable and dirt-resistant. It will also resist moisture, fading and stains.
Virtually all exterior surfaces
Medium-High
A semi-gloss enamel sheen is sleek and radiant with a hard, durable finish. It is formulated to withstand wear, and will also resist moisture, fading and stains.
Doors, trim and shutters; Exterior furniture
High
Hi-Gloss enamel sheen have a brilliant, shiny appearance and a durable, glass-like finish that allows dirt and grime to be wiped clean.
High-use surfaces
High
- Free Same-Day, Next-Day Delivery*
- Call, Text, or Email Your Paint Order
- Will Call & Schedule Deliveries
- Custom Color Matching
- Product & Record Order Management
- Expert Paint Knowledge
- Free Same-Day, Next-Day Delivery*
- Call, Text, or Email Your Paint Order
- Will Call & Schedule Deliveries
- Custom Color Matching
- Product & Record Order Management
- Expert Paint Knowledge
- Get 10%-20% back in quarterly rewards on BEHR® Products when you join Home Depot's Pro Xtra™ loyalty program
- Call, Text or E-mail your orders to your dedicated BEHR PRO Paint Specialist
- Arrange will call & Schedule Deliveries for pick-up at your Home Depot location or for delivery to you
