BEHR® Fast-Drying Water-Based Wood Stain
BEHR Fast Drying Water-Based Wood Stain provides rich colour and application control to your interior wood stain project. This formula can be tinted to a wide range of popular interior colours and provides a warm look to any interior wood surface. This high-performance wood stain dries quickly and evenly, allowing you to achieve great results in less time.
See Our Selection of Water-Based Wood Stains and Finishes
Finish
Flat finish prior to adding protective clear coat.
Best For Use In
Properly prepared interior, smooth unfinished, unsealed or stripped wood surfaces, including floors.
Coverage
9.3 m2 (100 Sq. Ft.) / 947 ml
PRODUCT USAGE
-
Prep
Before Use -
1 Coat
Coverage -
Spread Rate:
9.3 m2 (100 Sq. Ft.) / 947 ml -
Clean-Up
Soap & Water
PROTECT FROM FREEZING. Do Not Use Without The Addition Of Tinting Colourants
Properly prepared interior, smooth unfinished, unsealed or stripped wood surfaces, including floors.
Surface Preparation
- Surface must be dry, clean, and free of dirt, grease, glue, and existing coatings before staining.
- Sand the wood in the direction of the grain using fine-grit sandpaper (#150) until smooth.
- Remove all sanding dust.
- To ensure uniform acceptance of stain colour and beautiful results, pretreat the wood with BEHR® Water-Based Pre-Stain Wood Conditioner following label directions.
Read More
Product Preparation and Colour Testing
- Stir stain thoroughly before and occasionally during use.
- Do not thin.
- Always test stain on an inconspicuous area of the wood to verify desired colour.
Read More
Stain Application
- Apply stain in the direction of the grain with a brush or clean cloth.
- Allow the stain to penetrate 5-10 minutes to achieve the desired colour.
- The more time the stain is allowed to penetrate, the richer and darker the colour will be.
- Remove stain that has not absorbed into the wood with a clean cloth.
- Wipe in the direction of the grain, while blending light and dark areas to obtain a uniform colour.
- Do not allow stain that has not penetrated into the wood to dry on the wood surface.
- To darken the colour, apply a second coat after 1 hour, repeating directions above.
- Do not sand between coats of stain.
Read More
Clear Finish Application
- Allow the stain to dry for a minimum of 1 hour (dry time may be extended due to high humidity, low temperatures, or inadequate ventilation).
- Complete your project by applying a BEHR Clear Protective Finish, following label directions.
- Recommended finishes include BEHR Fast-Drying Polyurethane or BEHR Spar Urethane.
- Slight ambering may occur when these clear finishes are applied over light-coloured stains.
- Always spot test on an inconspicuous area to ensure satisfactory results.
Read More
Disposal
- For disposal of empty containers and unused product, contact your household refuse collection service
Read More
To consult with a Behr Certified Coatings Professional, call 1-800-661-1591.
Read More
Read More
Reviews
How-To
Find step-by-step instructions in our how-to articles and videos.
SDS AND DATA SHEET
BEHR® Fast-Drying Water-Based Wood Stain
Clear Tint Base B4500
Dark Walnut B4502
Jacobean B4504
Ebony B4506
Red Mahogany B4508
Golden Oak B4510
Classic Grey B4512
Special Walnut B4514
Early American B4516
Espresso B4518
English Chestnut B4520
Golden Pecan B4522
White Wash Pickling B4580
See Full SDS, Product Data & Safety
WARRANTY
LIMITED WARRANTY: For one year from the date of purchase, Behr Paint Company warrants to the original consumer purchaser, (1) that the product meets Behr Paint Company manufacturing specifications, and (2) the performance of this product when applied according to the label instructions and specifications. If this product is found not to perform as specified on the label within one year from the date of purchase, Behr Paint Company will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. The clause of limitation of liability which follows is inapplicable in Quebec. This warranty excludes (1) labour and costs of labour for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. To the extent permitted by applicable law, any implied warranties including the implied warranties of merchantability and of fitness for a particular purpose, are limited to the duration of this express warranty. The above provisions are not intended to operate where prohibited by law. This limited warranty is the only warranty provided by Behr Paint Company unless extended by a provincial consumer statute. To obtain warranty service, call 1-800-661-1591, or contact Behr Paint Company at 110-600 Barlow Square S.E., Calgary, AB T2C 5T7. Behr Paint Company reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.
