BEHR® Fast-Drying Water-Based Polyurethane
BEHR Fast Drying Water-Based Polyurethane is a clear protective finish that shields your interior wood surfaces that are stained with BEHR Water-Based Wood Stain. This durable polyurethane is designed to prolong the life of your wood surface and create a smooth, lasting finish. This product enhances the look and colour of your wood surface, allowing its true beauty to shine through. Multiple sheens are available depending on your desired look.
See Our Selection of Water-Based Wood Stains and Finishes
Finish
Available in Matte, Satin, Semi-Gloss, and Gloss Finish
Best For Use In
Properly prepared interior bare or stained wood surfaces such as furniture, mouldings, cabinets, trim, doors and residential hardwood floors.
Coverage
11.6 m2 (125 Sq. Ft.) / 947 ml
PRODUCT USAGE
-
Prep
Before Use -
2 Coats Required
3 Coats if Desired -
Spread Rate:
11.6 m2/ 947 ml -
Clean-Up
Soap & Water
READY TO USE. PROTECT FROM FREEZING.
Properly prepared interior bare or stained wood surfaces such as furniture, moldings, cabinets, trim, doors and residential hardwood floors.
CAUTION: Top coated surfaces may be slippery when wet.
Surface Preparation
The following steps are recommended for the best results.
- For refinishing, remove all wax or cleaner build-up with a wax stripper or degreaser prior to sanding.
- Sand all surfaces in the direction of the wood grain to desired smoothness.
- DO NOT USE steel wool.
- Remove all dust from sanded surfaces and clean with a tack cloth.
Read More
Application
- Do not shake or thin.
- Do not apply in direct sunlight or in temperatures below 10°C or above 32°C.
- Stir thoroughly prior to and during use.
- If wood stain colour is desired, apply BEHR® Wood Stain. Follow all label instructions.
- Using a high-quality nylon/polyester bristle brush, dip approximately an inch into the can, gently tapping it against the inside to remove any excess.
- Apply a thin, even coat following the direction of the grain making sure to maintain a wet edge.
- To minimize the brush marks and bubbles after staining application, tip off the surface by holding the brush at a 45-degree angle and lightly run the bristles over the entire length of the wood.
- Floor Application: use a synthetic pad applicator or bristle brush and maintain a wet edge to avoid lap marks.
- For maximum durability, 3 coats are required.
- Do not puddle, over-brush or overlap finishes.
- Sand lightly between coats with fine sandpaper.
- Remove all dust prior to applying additional coats.
Read More
Dry Time
- Dries to touch in 1 hour.
- Sand or Recoat: 1 hour.
- After the final coat, allow 12 - 24 hours before light use.
- Fully cured: 3 days after the final coat.
Read More
Disposal
- For disposal of empty containers and unused product, contact your household refuse collection service
Read More
To consult with a Behr Certified Coatings Professional, call 1-800-661-1591.
Read More
Read More
Reviews
How-To
Find step-by-step instructions in our how-to articles and videos.
WARRANTY
LIMITED WARRANTY: For one year from the date of purchase, Behr Paint Company warrants to the original consumer purchaser, (1) that the product meets Behr Paint Company manufacturing specifications, and (2) the performance of this product when applied according to the label instructions and specifications. If this product is found not to perform as specified on the label within one year from the date of purchase, Behr Paint Company will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. The clause of limitation of liability which follows is inapplicable in Quebec. This warranty excludes (1) labour and costs of labour for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. To the extent permitted by applicable law, any implied warranties including the implied warranties of merchantability and of fitness for a particular purpose, are limited to the duration of this express warranty. The above provisions are not intended to operate where prohibited by law. This limited warranty is the only warranty provided by Behr Paint Company unless extended by a provincial consumer statute. To obtain warranty service, call 1-800-661-1591, or contact Behr Paint Company at 110-600 Barlow Square S.E., Calgary, AB T2C 5T7. Behr Paint Company reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.
