One can of Behr Premium Semi-Transparent wood stain with a wooden deck in the background
BEHR PREMIUM® Solid Colour Waterproofing Stain & Sealer

Our most advanced formula weathers it all.

Enhance your wood's natural patterns while providing increased protection from the elements with Canada’s Most Trusted Exterior Stain Brand*. This 100% acrylic formula seals out the elements, and sun's harmful UV rays, for up to 10 yrs. on decks and up to 25 yrs. on fences & siding. It's available in 1,600 custom colours to help you create a look that's as beautiful as it is durable.

Features

  • Available in 1600 custom colours
  • UV Protection
  • Rain Protection
  • Winter Protection
WHY CHOOSE BEHR PREMIUM® SOLID COLOUR STAIN & SEALER?

Our most advanced formula weathers it all.

Popsicle melting on a stained deck

UV Protection

Behr’s Solid Colour Stain is formulated to protect wood from drying out and cracking under direct sunlight, keeping your deck looking great summer after summer.

Deck with snow melting on it

All-Weather Protection

BEHR PREMIUM Stain can withstand snow, rain and ice and with our Low-temperature Protection paired with an advanced durable finish, you can be confident that it will weather any weather.

Stained deck with white water drops on it

Hide Wood Imperfections

BEHR PREMIUM Stain creates a Solid Colour film that hides wood grain and minor imperfections to transform and beautify your outdoor living space.

 

USE THE PROPER TOOLS

USE THE PROPER TOOLS

Best results are achieved when you use the recommended tools.
  • For best results, a pad applicator is recommended over large areas.
  • Use a nylon/polyester brush for areas requiring more accuracy.
  • Use 10 mm nap or longer when appropriate.
  • A high quality pump sprayer with a variable tip or an airless sprayer with a .38 - .48 mm tip may be used.
 
 

For Detailed Information

For Detailed Information

Visit our product page.
Preparation Requirement
  • Before beginning your project, make sure to clean your surface. For best results, apply the second coat thinner than the first. Proper surface preparation is the key to attaining a beautiful appearance and achieving long lasting durability.
Required Product: BEHR PREMIUM® All-In-One Wood Cleaner
  • This product is required to properly prepare your surfaces for staining.
  • Use on Exterior Wood & Composites, Decks, Siding, Shakes, Shingles, Fences & Patio Furniture, Vinyl & Aluminum Siding, Masonry, Stucco and Concrete. Make sure to use after application of BEHR PREMIUM® NO. 64 Wood Stain & Finish Stripper.
  • Learn more about All-In-One Wood Cleaner.
Recommended Product: BEHR PREMIUM® Wood Stain Finish Stripper
  • This product is required to properly prepare your surfaces for staining.
  • Use on Exterior latex, oil-based and 100% acrylic coatings on Wood Decks, Porches & Patios, Siding, Fences, Shakes and Shingles. After stripping the wood surface, BEHR PREMIUM® All-In-One Wood Cleaner NO. 63 is required to properly clean the surface and neutralize the stripping action.
  • Learn more about Wood Stain & Finish Stripper.
 
  • PRODUCT USAGE AND APPLICATION INSTRUCTIONS

    PRODUCT USAGE

    • Paint prep icon

      Must Prep
      Before Staining

    • Two paint rollers, two coat icon.

      2 Thin Coats
      Recommended

    • Spread rate icon

      Spread Rate:
      1st Coat
      19-37 m2
      2nd Coat
      37-74 m2

    • Soap and water cleaning a paint brush icon

      Soap & Water
      Clean-Up

    Recommended for properly prepared new to heavily weathered or cracking wood surfaces (0 to 15+ years exposure) such as: Decks, Railings, Shakes, Shingles, Siding, Roofs, Fences, Wood Patio Furniture and Composites.

    Preparation

    THE FOLLOWING STEPS ARE RECOMMENDED FOR BEST RESULTS.

    • Use a product such as BEHR PREMIUM® NO. 64 Wood Stain & Finish Stripper to remove loose wood fibers, latex, oil-based and 100% acrylic coatings on new or weathered wood. BEHR PREMIUM® NO. 63 All-In-One Wood Cleaner MUST be used following NO. 64 to clean, brighten & neutralize wood.
    • When NO. 64 is not needed, use a product such as NO. 63 to clean and brighten the wood surface and to remove light to medium exterior stains caused by mold, mildew, algae & fungus. Rinse thoroughly and allow to dry before coating.
    • On new wood, use a product such as NO. 63 to remove mill glaze and open the pores of the wood. Lightly sand to remove remaining wood fibers/fuzz.

    Read More

    Application

    • Must apply between 5-32˚C.
    • Coating will resist rain after 4 hours. The wood surface must be completely dry before application.
    • No primer needed on most woods. However, Redwood, Cedar, Cypress, and other "bleeding" woods contain water-soluble extractives which may cause discolouration of white and pastel colours; therefore prime the above type woods with one coat of a product such as BEHR® NO. 436 Exterior Multi-Surface Primer & Sealer. See the label for additional instructions. Intermix multiple containers to ensure colour uniformity.
    • Stir product occasionally throughout the application.
    • Use a 10 mm nap roller, nylon/polyester brush, pad applicator, or airless sprayer. Airless spray is recommended for experienced applicators only; use a .38 mm - .48 mm (.015 - .019") tip.
    • If thinning is required, thin with water at a rate of no more than 236 mL per 3.79 L.
    • Maintain a wet edge when applying.
    • Always back-brush and apply product end to end or to board lengths to prevent lap marks. Over application of stain will lead to surface failure including peeling and cracking. AVOID APPLYING STAIN TOO HEAVILY. TWO THIN COATS RECOMMENDED.
    • For optimum performance, coat all six sides of the wood.

    Read More

    Dry Time

    • 1-2 hours before recoat. Wait 24-48 hours before light foot traffic. 72 hours for full cure.

    Read More

    Disposal

    • For disposal of unused paint products, please contact your household refuse collection service.

    Read More

    To consult with a Behr Company Representative, call 1-800-661-1591.

    Read More

    Read More

  • SDS & DATA SHEET
  • WARRANTY
    WARRANTY

    Behr Process LLC warrants to you, the original residential consumer purchaser, the performance of this product as described on this label for 25 years on vertical surfaces and 10 years on horizontal surfaces, from the date of purchase. THIS WARRANTY IS NOT VALID WHEN THE PRODUCT IS NOT PROPERLY APPLIED TO A PROPERLY PREPARED SURFACE OR CARED FOR IN ACCORDANCE WITH THE LABEL DIRECTIONS.  Colour fading and slight natural greying of the wood may occur during the warranty period, especially in areas exposed to heavy foot traffic or excessive weather. This warranty is not transferable. If this product is found not to perform as specified on the label during the warranty period, Behr Process LLC will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. The clause of limitation of liability which follows is inapplicable in Québec. THIS WARRANTY EXCLUDES (1) LABOUR AND COSTS OF LABOUR FOR THE APPLICATION OR REMOVAL OF ANY PRODUCT, AND (2) ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES, WHETHER BASED ON BREACH OF EXPRESS OR IMPLIED WARRANTY, NEGLIGENCE, STRICT LIABILITY OR ANY OTHER LEGAL THEORY. The above provisions are not intended to operate where prohibited by law. This limited warranty is the only warranty provided by Behr Process LLC unless extended by a provincial consumer statute. To obtain warranty service, call 1-800-661-1591, or contact Behr Process LLC at 110-600 Barlow Square S.E., Calgary, AB T2C 5T7. Behr Process LLC reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.

  • PRODUCT USAGE AND APPLICATION INSTRUCTIONS
  • SDS & DATA SHEET
  • WARRANTY
PRODUCT USAGE
  • Paint prep icon

    Must Prep
    Before Staining

  • Two paint rollers, two coat icon.

    2 Thin Coats
    Recommended

  • Spread rate icon

    Spread Rate:
    1st Coat
    19-37 m2
    2nd Coat
    37-74 m2

  • Soap and water cleaning a paint brush icon

    Soap & Water
    Clean-Up

Recommended for properly prepared new to heavily weathered or cracking wood surfaces (0 to 15+ years exposure) such as: Decks, Railings, Shakes, Shingles, Siding, Roofs, Fences, Wood Patio Furniture and Composites.

Preparation

THE FOLLOWING STEPS ARE RECOMMENDED FOR BEST RESULTS.

  • Use a product such as BEHR PREMIUM® NO. 64 Wood Stain & Finish Stripper to remove loose wood fibers, latex, oil-based and 100% acrylic coatings on new or weathered wood. BEHR PREMIUM® NO. 63 All-In-One Wood Cleaner MUST be used following NO. 64 to clean, brighten & neutralize wood.
  • When NO. 64 is not needed, use a product such as NO. 63 to clean and brighten the wood surface and to remove light to medium exterior stains caused by mold, mildew, algae & fungus. Rinse thoroughly and allow to dry before coating.
  • On new wood, use a product such as NO. 63 to remove mill glaze and open the pores of the wood. Lightly sand to remove remaining wood fibers/fuzz.

Read More

Application

  • Must apply between 5-32˚C.
  • Coating will resist rain after 4 hours. The wood surface must be completely dry before application.
  • No primer needed on most woods. However, Redwood, Cedar, Cypress, and other "bleeding" woods contain water-soluble extractives which may cause discolouration of white and pastel colours; therefore prime the above type woods with one coat of a product such as BEHR® NO. 436 Exterior Multi-Surface Primer & Sealer. See the label for additional instructions. Intermix multiple containers to ensure colour uniformity.
  • Stir product occasionally throughout the application.
  • Use a 10 mm nap roller, nylon/polyester brush, pad applicator, or airless sprayer. Airless spray is recommended for experienced applicators only; use a .38 mm - .48 mm (.015 - .019") tip.
  • If thinning is required, thin with water at a rate of no more than 236 mL per 3.79 L.
  • Maintain a wet edge when applying.
  • Always back-brush and apply product end to end or to board lengths to prevent lap marks. Over application of stain will lead to surface failure including peeling and cracking. AVOID APPLYING STAIN TOO HEAVILY. TWO THIN COATS RECOMMENDED.
  • For optimum performance, coat all six sides of the wood.

Read More

Dry Time

  • 1-2 hours before recoat. Wait 24-48 hours before light foot traffic. 72 hours for full cure.

Read More

Disposal

  • For disposal of unused paint products, please contact your household refuse collection service.

Read More

To consult with a Behr Company Representative, call 1-800-661-1591.

Read More

Read More

SDS & DATA SHEET

BEHR PREMIUM® Solid Colour Waterproofing Stain & Sealer
Tintable White 5011 Deep Base 5013 Cedar Naturaltone 50533 Chocolate Redwood Russet Cordovan Brown Padre Brown Slate
See Full SDS, Product Data & Safety
See Full SDS, Product Data & Safety
WARRANTY

Behr Process LLC warrants to you, the original residential consumer purchaser, the performance of this product as described on this label for 25 years on vertical surfaces and 10 years on horizontal surfaces, from the date of purchase. THIS WARRANTY IS NOT VALID WHEN THE PRODUCT IS NOT PROPERLY APPLIED TO A PROPERLY PREPARED SURFACE OR CARED FOR IN ACCORDANCE WITH THE LABEL DIRECTIONS.  Colour fading and slight natural greying of the wood may occur during the warranty period, especially in areas exposed to heavy foot traffic or excessive weather. This warranty is not transferable. If this product is found not to perform as specified on the label during the warranty period, Behr Process LLC will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. The clause of limitation of liability which follows is inapplicable in Québec. THIS WARRANTY EXCLUDES (1) LABOUR AND COSTS OF LABOUR FOR THE APPLICATION OR REMOVAL OF ANY PRODUCT, AND (2) ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES, WHETHER BASED ON BREACH OF EXPRESS OR IMPLIED WARRANTY, NEGLIGENCE, STRICT LIABILITY OR ANY OTHER LEGAL THEORY. The above provisions are not intended to operate where prohibited by law. This limited warranty is the only warranty provided by Behr Process LLC unless extended by a provincial consumer statute. To obtain warranty service, call 1-800-661-1591, or contact Behr Process LLC at 110-600 Barlow Square S.E., Calgary, AB T2C 5T7. Behr Process LLC reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.

Subscribe

Never miss out on the hottest deals and latest news from BEHR.  By creating an account that includes your personal information, you are agreeing to our Privacy Policy.

Please enter email address.
Please enter a valid email address.
close x

Sign Up To Get the Hottest Deals and Latest News.

You'll never miss out on the best Behr promotions, products and news.

Fields with an asterisk (*) are required. See our privacy policy