BEHR PREMIUM ADVANCED DECKOVER® Textured
Featuring EVEN BETTER Adhesion and Cracking Resistance!
The new BEHR PREMIUM ADVANCED DECKOVER® TEXTURED resurfaces properly prepared weathered wood and concrete by filling-in cracks and taming splinters, extending the life of your deck and living space so you can enjoy the outdoors. This 100% acrylic formula conceals cracks and splinters up to 6 mm (1/4"). It creates a slip-resistant, waterproof coating that resists cracking and peeling. It's available in 54 solid custom colours, and is great for decks, patios, composite decks, pool decks and walkways.
View ADVANCED DeckOver Textured Colours
DO NOT USE ON DRIVABLE SURFACE SUCH AS GARAGE FLOORS AND DRIVEWAYS.
Finish
Creates a textured, slip-resistant finish
Best For Use In
For properly prepared exterior weathered or cracked horizontal and vertical wood, concrete and composite surfaces.
Coverage
1st Coat 7 m2 ; 2nd Coat 7 m2
PRODUCT USAGE
-
Must Prep
Before Use -
2 Coats Required
-
Horiz. Spread Rate:
1st Coat 7 m2
2nd Coat 7 m2 -
Clean-Up
Soap & Water
Recommended for properly prepared interior and exterior weathered or cracked horizontal and vertical wood and composite surfaces such as Decks, Railings, Porches and Boat Docks. Also great for concrete surfaces such as Pool Decks, Patios and Sidewalks. DO NOT USE ON DRIVABLE SURFACES SUCH AS GARAGE FLOORS.
Preparation
PROPER SURFACE PREPARATION IS REQUIRED.
- Exterior Wood Surfaces: Replace rotting or unstable boards and remove loose splinters.
- For failing coatings or to remove loose wood fibers, use a product such as BEHR PREMIUM® No. 64 Wood Stain & Finish Stripper followed by BEHR PREMIUM® No. 63 All-In-One Wood Cleaner to neutralize the wood.
- When No. 64 is not needed, a product such as No. 63 MUST be used to remove mill glaze and clean the wood surface.
- After using either No. 64 or No. 63, rinse thoroughly with a garden hose or pressure washer.
- When rinsing with a pressure washer, use the broadest spray pattern while keeping the nozzle at least 24" away from the surface. Allow the area to dry at least 24 hours before coating. Lightly sand to remove remaining wood fibers/fuzz.
- Concrete Surfaces: Avoid areas that are structurally weak or subject to hydrostatic pressure above 8 psi.
- Allow new surfaces to cure for 30 days.
- Use a product such as BEHR PREMIUM No. 992 Concrete & Masonry Paint Stripper to strip peeling coating.
- Use a product such as BEHR PREMIUM No. 991 Concrete & Masonry Cleaner & Etcher to clean and etch uncoated concrete or No. 990 Concrete & Masonry Degreaser & Cleaner on sound, coated surfaces prior to coating.
Read More
Application
- Use product when air and surface temperatures are between 10-32˚ C.
- During application, avoid exposure of container to direct sunlight. Do not use if rain is expected within 24 hours. Avoid painting if humidity is expected to be greater than 80%.
- Intermix multiple containers to ensure colour uniformity.
- Stir product occasionally throughout application. DO NOT THIN PRODUCT.
- FOR NAIL HOLES AND CRACKS UP TO 6 MM, COMPLETELY FILL IN WITH TEXTURED DECKOVER COATING USING A NYLON/POLYESTER BRUSH AND ALLOW TO DRY PRIOR TO ROLLING. DEEP NAIL HOLES AND CRACKS MAY REQUIRE ADDITIONAL FILLING.
- For edges, corners and in between wood boards, apply using a nylon/polyester brush. Use pressure while rolling and apply a generous, even coat using a 13 mm nap roller. For a smoother texture, use a brush or thinner nap roller (i.e. 6 mm).
- FOR VERTICAL SURFACES such as railings, use a nylon/polyester brush or roller and apply two thin coats at a spread rate of 37 m2 (400 sq. ft.) per 3.79 L.
- Do not use with airless sprayer.
- For optimum performance, film uniformity, leveling and to cover cracks, a second coat MUST be applied.
- Maintain a wet edge when applying.
Read More
Dry Time
- 4-6 hours before recoat. Dries to touch in 4 hours.
- Wait 24-48 hours before light foot traffic. 72 hours to full cure.
- Additional dry time may be needed in cooler temperatures and higher humidity.
- Premature heavy traffic will cause coating failure.
Read More
Disposal
- For disposal of empty containers and unused product, contact your household refuse collection service.
Read More
To consult with a Behr Certified Coatings Professional, call 1-800-661-1591.
Read More
Read More
Reviews
Often Bought Together
How-To
Find step-by-step instructions in our how-to articles and videos.
SDS AND DATA SHEET
WARRANTY
For one year from the date of purchase, Behr Process LLC warrants to the original consumer purchaser, (1) that the product meets Behr Process LLC’s manufacturing specifications, and (2) the performance of this product when applied according to the label instructions and specifications. In the event this product proves to be defective within one year from the date of purchase, Behr Process LLC will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. The clause of limitation of liability which follows is inapplicable in Québec. This warranty excludes (1) labour and costs of labour for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. To the extent permitted by applicable law, any implied warranties including the implied warranties of merchantability and of fitness for a particular purpose, are limited to the duration of this express warranty. The above provisions are not intended to operate where prohibited by law. This limited warranty is the only warranty provided by Behr Process LLC unless extended by a provincial consumer statute. To obtain warranty service, call 1-800-661-1591, or contact Behr Process LLC at 110-600 Barlow Square S.E., Calgary, AB T2C 5T7. Behr Process LLC reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.
