BEHR ULTRA™ Stain-Blocking Ceiling Paint & Primer
For advanced performance and stain-blocking on all of your home's ceilings, choose BEHR ULTRA™ Stain-Blocking Ceiling Paint & Primer◊. Its flat sheen hides minor surface imperfections, and can be tinted to light colours.
◊A primer coat may be needed on some surfaces. See label for details.
Finish
A flat sheen has a matte, non-reflective finish that's easy to clean, touches up well and will also hide minor surface imperfections.
Best For Use In
Properly prepared coated and uncoated Interior Ceilings.
Coverage
23-37 m2
PRODUCT USAGE
-
1 HR Dry Time
2 HR Recoat Time -
23-37 m2
(250-400 Sq. Ft)
Coverage -
Soap & Water
Clean-Up -
Protect
from Freezing
Properly prepared coated and uncoated Interior Ceilings.
Preparation & Prime
- Remove loose paint, wash off any dirt and grease with detergent, remove mildew stains with a mildew stain removing product.
- Scuff sand glossy surfaces.
- Countersink nailheads, repair imperfections and sand smooth.
- Remove all dust with a damp cloth, allow to dry.
- Allow new stucco, plaster and masonry to cure for 30 days before priming.
- Make sure that there are no active water problems and that any previous water damage is fully dry.
- Use BEHR ULTRA™ STAIN-BLOCKING CEILING PAINT & PRIMER as a primer for repaired or uncoated surfaces.
- Lock in stains with BEHR ULTRA STAIN-BLOCKING CEILING PAINT & PRIMER as a spot primer. For heavy stains, test for stain bleedthrough by applying BEHR ULTRA STAIN-BLOCKING CEILING PAINT & PRIMER as a topcoat to a small section. If the stain bleeds through the topcoat, spot prime another coat to the stained area and test again before topcoating the entire ceiling. If bleeding continues, a longer dry time is needed before topcoating. Additional coats may be needed to achieve hide.
- For drastic colour changes, apply a primer coat of BEHR ULTRA STAIN-BLOCKING CEILING PAINT & PRIMER if needed.
Read More
Application
- Spatter and drip resistant.
- Use product when the surface and air temperatures are between 10-32°C.
- Stir paint occasionally. Intermix containers of same product to ensure colour and sheen uniformity.
- Use a high quality 10-13 mm nap roller cover, nylon/polyester brush or an airless sprayer (.015-.019” spray tip, 60 mesh filter).
- Coverage is 23-37 m2 (250-400 sq. ft.) per gallon depending on the surface texture, porosity and application method.
- Do not thin if using a roller or brush; however, if using a sprayer and thinning is required, thin with water at a rate of no more than 250 mL per 3.79 L.
- Multiple coats may be required to complete hide.
- Popcorn style acoustic ceilings; use acoustic ceiling roller cover 10-13 mm or airless sprayer (.015-.019” spray tip, 60 mesh filter).
Read More
Dry Time
- Dries to touch in 1 hour at 25°C and 50% humidity, re-coat in 2 hours.
- Longer dry time required in cooler temperatures and in higher humidity.
- Dry paint film is mildew resistant
Read More
Clean Up & Storage
- Use soap and water.
- Properly dispose of all soiled rags and protect unused product from freezing.
- For disposal of empty containers and unused product, contact your local household refuse collection service.
Read More
To consult with a Behr Company Representative, call 1-800-661-1591.
Read More
Read More
Reviews
How-To
Find step-by-step instructions in our how-to articles and videos.
SDS AND DATA SHEET
BEHR ULTRA™ Stain-Blocking Ceiling Paint & Primer
See Full SDS, Product Data & SafetyWARRANTY
LIFETIME LIMITED WARRANTY: Behr Paint Company warrants to you, the original residential consumer purchaser, the performance of this product as described on this label for so long as you reside in your home. THIS WARRANTY IS NOT VALID WHEN THE PRODUCT IS NOT PROPERLY APPLIED TO A PROPERLY PREPARED SURFACE OR CARED FOR IN ACCORDANCE WITH THE LABEL DIRECTIONS. This warranty is not transferable. If this product is found not to perform as specified on the label during the warranty period, Behr Paint Company will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. The clause of limitation of liability which follows is inapplicable in Quebec: This warranty excludes (1) labour and costs of labour for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. To the extent permitted by applicable law, any implied warranties including the implied warranties of merchantability and of fitness for a particular purpose, are limited to the duration of this express warranty. The above provisions are not intended to operate where prohibited by law. This limited warranty is the only warranty provided by Behr Paint Company unless extended by a provincial consumer statute. To obtain warranty service, call 1-800-661-1591 or contact Behr Paint Company at 110-600 Barlow Square S.E., Calgary, AB T2C 5T7. Behr Paint Company reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.
