BEHR PREMIUM® Solid Colour Concrete Stain

Avg. Rating:

A durable solid colour stain designed to help protect and enhance both exterior and interior, vertical and horizontal concrete surfaces. This Siliconized 100% Acrylic formula is designed to provide a long-lasting durable finish.

Click Here to see available colours.

FOR BASEMENTS, USE BEHR PREMIUM® BASEMENT & MASONRY WATERPROOFER


Finish

Flat finish

Best For Use In

Interior & Exterior concrete and masonry surfaces

Coverage

Rough: 37-47 m2 ; Smooth: 47-56 m2

PRODUCT USAGE
  • Concrete square feet coverage icon

    Rough Surface
    37-47 m2
    Smooth Surface
    47-56 m2

  • Clock icon

    2 HR Dry To Touch
    2-4 HR Recoat Time

  • Soap and water cleaning a paint brush icon

    Soap & Water
    Clean-Up

  • Thermometer Icon

    Protect
    from Freezing

Properly prepared Interior or Exterior surfaces such as: Concrete, Masonry Walls, Basements, Patios, Sidewalks, Driveways*, Garage Floors*, Tennis Courts, Cement Blocks, Pillars and Brick. Not for use on surfaces subject to hydrostatic pressure.

  • * Driveways and Garage Floors - Lack of proper surface preparation and/ or over-application can lead to automobile tires lifting the product from the surface.
  • CAUTION: Stained surfaces may become slippery when wet. Use caution when walking on surface when moisture is present. Use a product such as BEHR PREMIUM® NON-SKID NO. 970 to help prevent slipping.

New and Uncoated Concrete or Masonry Surfaces:

  • New concrete must cure for a minimum of 30 days.
  • For proper penetration and adhesion of topcoat, use a concrete & masonry cleaner and etcher to clean and etch the surface. Remove mildew stains with a mildew stain removing product. Follow all label instructions.
  • Apply a product such as BEHR PREMIUM Concrete & Masonry Bonding Primer No. 880 to increase adhesion of topcoat to the surface. Follow all label instructions.

Painted, Stained or Sealed Concrete:

  • Option 1- To completely strip the entire surface, use a concrete & masonry paint stripper product.
  • Option 2- To recoat over an existing coating, remove any loose or peeling paint and scuff sand the surface.
  • Clean previously coated surfaces in sound condition.
  • Clean and etch any bare concrete surface.
  • Spot prime all uncoated areas with a product such as BEHR PREMIUM Concrete & Masonry Bonding Primer No. 880 to increase adhesion of topcoat to the surface. Follow all label instructions.

Read More

Application

  • DO NOT THIN. Intermix all cans of same product to ensure colour uniformity. Stir stain before and occasionally during application.
  • Use product when air and surface temperatures are between 10-32°C.
  • Apply a thin, even coat using a 6-10 mm nap roller cover, pad applicator or a nylon/polyester brush at a spread rate of 47-56 m2 per 3.67 L. Use long, even strokes in one direction to avoid lap lines.
  • Since concrete varies in texture/porosity, two coats may be required for uniform colour appearance. Apply a second coat (in a criss-cross direction) if uniformity is needed. Recoat after 2-4 hours. Periodic touch-ups may be necessary.

Read More

Dry Time

  • Longer dry time required in cooler temperatures and in higher humidity.
  • Allow 24 hours for light foot traffic.
  • Park tires on corrugated cardboard for 14 days after applying stain. After two weeks, dry stained surface may be cleaned with a mild, non-abrasive liquid detergent.

Read More

Disposal

  • To recycle or properly dispose of product in your community, contact your household refuse collection service.

Read More

To consult with a Behr Company Representative, call 1-800-661-1591.

Read More

Read More

Reviews

WARRANTY

LIMITED WARRANTY: For one year from the date of purchase, Behr Paint Company warrants to the original consumer purchaser, (1) that the product meets Behr Paint Company manufacturing specifications, and (2) the performance of this product when applied according to the label instructions and specifications. If this product is found not to perform as specified on the label within one year from the date of purchase, Behr Paint Company will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. The clause of limitation of liability which follows is inapplicable in Quebec. This warranty excludes (1) labour and costs of labour for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. To the extent permitted by applicable law, any implied warranties including the implied warranties of merchantability and of fitness for a particular purpose, are limited to the duration of this express warranty. The above provisions are not intended to operate where prohibited by law. This limited warranty is the only warranty provided by Behr Paint Company unless extended by a provincial consumer statute. To obtain warranty service, call 1-800-661-1591, or contact Behr Paint Company at 110-600 Barlow Square S.E., Calgary, AB T2C 5T7. Behr Paint Company reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.