BEHR PREMIUM® Concrete & Masonry Paint Stripper No. 992
For projects that need a fresh restart, use BEHR PREMIUM Concrete & Masonry Paint Stripper. This biodegradable stripper is ideal for removing multiple coats of paint, stain, epoxy, sealant and most industrial coatings. It works on masonry, metal, artificial stone and concrete, and it's ideal for both vertical and horizontal surfaces.
Safety Data Sheets
BEST IN USE IN
Use on painted or stained Interior/Exterior, Vertical/Horizontal Concrete, Masonry, Artificial Stone, Brick and Metal Surfaces
COVERAGE
5-7 m2
-
Coverage:
5-7 m2 -
Keep Surface Wet
During Use -
Soap & Water
Clean-Up
- Use on painted or stained Interior/Exterior, Vertical/Horizontal Concrete, Masonry, Artificial Stone, Brick and Metal Surfaces such as: Garage Floors, Driveways, Walkways, Patios, Pool/Cool Decks, Basement Floors and Concrete Walls.
- Removes coatings such as: stains, epoxies, urethanes, elastomeric, alkyds, sealants, latex and most industrial and architectural paints.
- DO NOT USE ON NATURAL STONES SUCH AS MARBLE, GRANITE, LIMESTONE, SLATE, SANDSTONE, FLAGSTONE, TRAVERTINE, ONYX, SOAPSTONE, TERRAZZO, COLOURED CONCRETE, BRASS, BRONZE or COPPER.
- CAUTION: Stained surfaces may become slippery when wet. Use caution when walking on surface when moisture is present.
Preparation
- SHAKE WELL PRIOR TO USE.
- Pour BEHR PREMIUM CONCRETE & MASONRY PAINT STRIPPER N0. 992 into a paint tray or bucket. If water seems to have separated out, stir product until uniform.
- For vertical and glossy or greasy surfaces, scuff sand the surface lightly with a medium grit sand paper prior to application to prevent sagging of paint stripper.
- Test Patch: A test area will indicate the time required to lift coating and the suitability of the product for the paint and substrate.
- Protect grass and any nearby plants by dampening these areas with water and covering with plastic drop cloths.
- Prevent all rinse solution from entering storm drains.
Read More
Application
- Use product when air and surface temperatures are between 10-32°C.
- Wear protective clothing, goggles and acid resistant rubber gloves and boots. Use a NIOSH approved air purifying respirator with an organic vapour cartridge.
- Apply a thick layer of stripper onto the surface using a paintbrush or a stiff bristle broom to spread evenly. Completely cover original coated surface.
- Spread rate is approximately 6-7 m2
- Penetration varies according to coating type, thickness and temperature. COATING WILL WRINKLE WHEN THE JOB IS DONE. Most coatings will take between 1 – 6 hours to lift.
- Check periodically during the waiting period, to ensure that the coating is completely covered with the stripper. If the coated surface becomes visible again, re-apply a light coating.
- The stripper should remain wet and active until the coating wrinkles. If hot or windy conditions cause drying, re-apply a light coating.
- Use a scraper, squeegee or pressure washer to remove all coating and residue.
- The stripper is formulated to remove several layers of coating in one application. Some areas however, may require an additional application to remove all layers.
- The stripped surface must be rinsed with water thoroughly to remove all chemical residues before recoating.
- Allow surface to dry completely before recoating.
Read More
Disposal
- In case of contact with painted or finished surfaces, rinse immediately with fresh water. Product will damage automobile finishes.
- Properly dispose of old coating.
- To recycle or properly dispose of product in your community, contact your household refuse collection service.
Read More
To consult with a Behr Certified Coatings Professional, call 1-800-661-1591.
Read More
Read More
WARRANTY
For one year from the date of purchase, Behr Process LLC warrants to the original consumer purchaser, (1) that the product meets Behr Process LLC’s manufacturing specifications, and (2) the performance of this product when applied according to the label instructions and specifications. If this product is found not to perform as specified on the label within one year from the date of purchase, Behr Process LLC will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. The clause of limitation of liability which follows is inapplicable in Québec. This warranty excludes (1) labour and costs of labour for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. To the extent permitted by applicable law, any implied warranties including the implied warranties of merchantability and of fitness for a particular purpose, are limited to the duration of this express warranty. The above provisions are not intended to operate where prohibited by law. This limited warranty is the only warranty provided by Behr Process LLC unless extended by a provincial consumer statute. To obtain warranty service, call 1-800-854-0133 ext. 2, or contact Behr Process LLC at 110-600 Barlow Square S.E. Calgary, Alberta T2C 5T7. Behr Process LLC reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.
Read More
Reviews
PAINTING CONTRACTORS
Professional products and services specifically designed for residential and commercial painting contractors.
FOR CONTRACTORS
PROPERTY & FACILITY MANAGERS
A full range of products and services to help property and facility managers enhance and maintain the appearance of properties.
FOR PROPERTY MANAGERSREADY TO GET STARTED?
CONTACT A BEHR PRO® REP
Your reputation depends on your ability to do the job right. BEHR can help.
Find a rep
JOIN THE HOME DEPOT® PRO XTRA LOYALTY PROGRAM
Get 10% - 20% Back in Quarterly Rewards
BEHR® Paints, Stains & Primers.
About Interior Paint Sheens
Get the look you want and the protection you need for any room in your home.
A flat sheen has a non-reflective finish that touches up well and hides minor surface imperfections.
Low-traffic areas; interior walls and ceilings
Ceilings
Medium-Low
A matte sheen has a low-luster, reflective finish that is durable, easy to clean, touches up well and also hides minor surface imperfections.
Low-traffic areas; interior walls
Family rooms, living rooms, kids' rooms, bathrooms, dining rooms, ceilings
Medium
An eggshell enamel sheen has a soft, velvety appearance that resists dirt and grime, as well as mildew.
Moderate-traffic areas
Family rooms, living rooms, bedrooms, kids' rooms, hallways, dining rooms
Medium
A satin enamel sheen has a pearl-like finish that's easy to clean.
All interior surfaces; moderate- to high-traffic areas
Family rooms, living rooms, bedrooms, kids' rooms, hallways, kitchens, bathrooms, doors, windows, trim, cabinets, shutters, interior furniture
Medium-High
A semi-gloss enamel sheen is sleek and radiant resisting mildew, moisture and wear.
Cabinets and trim; high-traffic, high-moisture areas
Kids' rooms, hallways, kitchens, bathrooms, doors, windows, trim, cabinets, shutters
High
Hi-Gloss enamel sheens provide have a brilliant, shiny appearance and a durable, glass-like finish that allows dirt and grime to be wiped clean.
High-use surfaces
Kitchens, bathrooms, doors, windows, trim, cabinets, shutters, interior furniture
High
About Exterior Paint Sheens
Set the right curb appeal with exterior painting efforts that last.
A flat sheen is non-reflective, and easy to apply and touch up. It will minimize the appearance of minor surface imperfections.
Wood and vinyl walls and siding; brick and other masonry; fences
Medium-Low
A satin enamel sheen creates a pearl-like finish that's durable and dirt-resistant. It will also resist moisture, fading and stains.
Virtually all exterior surfaces
Medium-High
A semi-gloss enamel sheen is sleek and radiant with a hard, durable finish. It is formulated to withstand wear, and will also resist moisture, fading and stains.
Doors, trim and shutters; Exterior furniture
High
Hi-Gloss enamel sheen have a brilliant, shiny appearance and a durable, glass-like finish that allows dirt and grime to be wiped clean.
High-use surfaces
High
- Free Same-Day, Next-Day Delivery*
- Call, Text, or Email Your Paint Order
- Will Call & Schedule Deliveries
- Custom Color Matching
- Product & Record Order Management
- Expert Paint Knowledge
- Free Same-Day, Next-Day Delivery*
- Call, Text, or Email Your Paint Order
- Will Call & Schedule Deliveries
- Custom Color Matching
- Product & Record Order Management
- Expert Paint Knowledge
- Get 10%-20% back in quarterly rewards on BEHR® Products when you join Home Depot's Pro Xtra™ loyalty program
- Call, Text or E-mail your orders to your dedicated BEHR PRO Paint Specialist
- Arrange will call & Schedule Deliveries for pick-up at your Home Depot location or for delivery to you
