Any existing stain coating on your wood surface can prevent full penetration of your new finish or coating.
For Best Results:
Use BEHR PREMIUM® Stripper and Cleaning Products to help strip the old finish and allow the new coating to fully penetrate the wood surface. This will help ensure a longer lasting, more durable finish.
Once the surface has completely dried, coat with a BEHR Stain or Finish product.
Brush 5.1 - 6.4 cm (2"-2½")
High Pressure Nozzle
Start with the BEHR PREMIUM® Wood Stain & Finish Stripper to remove all of the previous coating.
Apply the finish stripper product to your wood surface.
Wait 15 minutes then scrub slightly with a stiff bristled broom. Rinse. You are now ready to clean your wood surface with BEHR PREMIUM All-in-One Wood Cleaner.
TIP: The BEHR PREMIUM All-in-One Wood Cleaner will neutralize the stripper product and clean and brighten your wood prior to coating.
To apply the cleaner, wet the wood surface.
Apply the cleaner product with a pump sprayer.
Wait 15 minutes then scrub the wet surface with a stiff bristled brush. Rinse the wood surface thoroughly.
Once the wood surface has completely dried, you're ready to apply a wood stain or finish product.
Inside or outside; paint or stain: Let’s figure out how much you’ll need to make amazing happen.
CalculateEvery project is unique: Keep small wrinkles from becoming big problems by letting the Behr Technical Experts lend a hand.
Get Expert HelpSo many colours and so many ideas: Visit Behr’s Colour Studio for inspiration, colour tools, design advice and everything you need to find your project’s perfect colour.
Colour Studio