BEHR® Multi-Purpose Siliconized Acrylic Caulk
BEHR® Multi-Purpose Caulk is a premium-grade caulk designed for use on a wide variety of interior and exterior applications, including, but not limited to, trim, crown moulding, baseboards, vents, doors and windows.
Finish
N/A
Best For Use In
For Trim, Baseboards, Molding & Doors
Coverage
Approximately 55 linear feet with a 3/16" bead
-
Consistent Flow/
No Air Pops -
Won't shine
through paint -
Resists
Paint Cracking
It adheres to common building materials such as drywall, plaster, concrete, stucco, masonry, brick, fiber cement, wood, composites, metal, vinyl, stone and painted surfaces. Not intended for below-grade or water immersion applications.
Surface Preparation
All surfaces must be clean and free of dust, chalk, oil, grease, wax, polish, mold and mildew stains, rust, loose material and all other foreign substances.
Read More
Application
- Apply with conventional hand or air-powered caulking equipment in a continuous operation with adequate pressure to fill the joint to the proper width and depth (do not overfill the joint).
- Apply when air, material and surface temperatures are between 4° and 32°C.
- Do not apply if rain or freezing conditions are expected within 24 hours.
- Cut the tip at a 45° angle to desired bead size.
- Position caulking tube tip into void to a provide solid fill.
- Use backer rod for gaps larger than 1 x 1 cm.
- Smooth using a dry tool or a slightly wet spatula if necessary.
Read More
Clean-Up & Disposal
- Clean tools, equipment and excess uncured material with soap and water immediately after use.
- For disposal of empty containers, unused product and soiled rags, contact your household refuse collection service.
Read More
Read More
Reviews
SDS AND DATA SHEET
BEHR® Multi-Purpose Siliconized Acrylic Caulk
See Full SDS, Product Data & SafetyWARRANTY
Behr Process LLC warrants to you, the original residential consumer purchaser, the performance of this product as described on this label for so long as you reside in your home. THIS WARRANTY IS NOT VALID WHEN THE PRODUCT IS NOT PROPERLY APPLIED TO A PROPERLY PREPARED SURFACE OR CARED FOR IN ACCORDANCE WITH THE LABEL DIRECTIONS. This warranty is not transferable. If this product is found not to perform as specified on the label during the warranty period, Behr Process LLC will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. The clause of limitation of liability which follows is inapplicable in Québec. THIS WARRANTY EXCLUDES (1) LABOUR AND COSTS OF LABOUR FOR THE APPLICATION OR REMOVAL OF ANY PRODUCT, AND (2) ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES, WHETHER BASED ON BREACH OF EXPRESS OR IMPLIED WARRANTY, NEGLIGENCE, STRICT LIABILITY OR ANY OTHER LEGAL THEORY. The above provisions are not intended to operate where prohibited by law. This limited warranty is the only warranty provided by Behr Process LLC unless extended by a provincial consumer statute. To obtain warranty service, call 1-800-661-1591, or contact Behr Process LLC at 110-600 Barlow Square S.E., Calgary, AB T2C 5T7. Behr Process LLC reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.
