BEHR PREMIUM® Low-Lustre Sealer

Beautify and protect the natural beauty of all your home's concrete & masonry surfaces with BEHR PREMIUM Concrete, Brick & Tile Low-Lustre Sealer. This low-gloss formula can also be used on pavers, artificial stone and stucco, and it also makes a great topcoat over paints and stains.

 


Finish

Low-Gloss

Best For Use In

Use on previously Coated or Uncoated, Vertical or Horizontal, Interior or Exterior concrete and masonry surfaces.

Coverage

23-37 m2

PRODUCT USAGE
  • Concrete square feet coverage icon

    Spread Rate
    18-42 m2

  • Clock icon

    1 HR Dry Time 
    4 HR Recoat Time

  • Soap and water cleaning a paint brush icon

    Soap & Water
    Clean-Up

  • Thermometer Icon

    Protect
    from Freezing

  • Use on previously Coated or Uncoated, Vertical or Horizontal, Interior or Exterior surfaces such as: Pavers, Concrete, Mexican Tile and Unglazed Tiles, Brick, Aggregate, Natural and Artificial Stone, Masonry and Stucco.
  • Not recommended for use on Wood, Metal, Granite, Marble, Terrazzo, areas immediately adjacent to pools or areas subject to hydrostatic pressure. Do not use over Oil-Based products.

Preparation

The following steps and products are required.

  • New concrete must cure for a minimum of 30 days.
  • For new or smooth concrete, use a product such as BEHR PREMIUM® Concrete & Masonry Cleaner & Etcher No. 991. (Do not use on coloured concrete).
  • Clean previously created surfaces in sound condition with a product such as BEHR PREMIUM® Concrete & Masonry Degreaser & Cleaner No. 990.
  • Stamped concrete requires the use of a cleaner to remove release agent prior to sealing.
  • Scrape and remove loose and peeling coating. To strip the surface, use a product such as BEHR PREMIUM® Concrete & Masonry Paint Stripper. Follow label instructions.

Read More

Application

Note: Horizontal surfaces may be subject to excessive wear. Therefore, periodic touch-ups may be necessary.

  • DO NOT THIN. Stir or shake before applying.
  • Use product when temperature is between 10-27°C. Do not apply in direct sunlight. Do not apply to wet surfaces or if rain or heavy dew is expected within 24 hours.
  • Apply a thin coat using a nylon/polyester brush, 10-13 mm nap roller, high quality pad applicator, or a high quality pump sprayer with an adjustable tip at a spread rate of 18-42 m2) per gallon. Spread rate is highly dependent on surface roughness and porosity. If sprayed, backroll for uniform thickness.
  • Additional coats (no more than 4) may be added for a higher gloss and added protection.

Read More

Dry Time

  • Longer dry time required in cooler temperatures and higher humidity.
  • Allow to dry 24 hours for light foot traffic. 72 hours to reposition furniture/heavy foot traffic and park tires on corrugated cardboard for 14 days.
  • Clean with a mild, non-abrasive liquid detergent after 30 days.

Read More

Disposal

  • Properly dispose of all soiled rags.
  • For disposal of empty containers and unused paint, contact your household refuse collection service.

Read More

To consult with a Behr Company Representative, call 1-800-661-1591.

Read More

Read More

Reviews

WARRANTY

LIMITED WARRANTY: For one year from the date of purchase, Behr Paint Company warrants to the original consumer purchaser, (1) that the product meets Behr Paint Company manufacturing specifications, and (2) the performance of this product when applied according to the label instructions and specifications. If this product is found not to perform as specified on the label within one year from the date of purchase, Behr Paint Company will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. The clause of limitation of liability which follows is inapplicable in Quebec. This warranty excludes (1) labour and costs of labour for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. To the extent permitted by applicable law, any implied warranties including the implied warranties of merchantability and of fitness for a particular purpose, are limited to the duration of this express warranty. The above provisions are not intended to operate where prohibited by law. This limited warranty is the only warranty provided by Behr Paint Company unless extended by a provincial consumer statute. To obtain warranty service, call 1-800-661-1591, or contact Behr Paint Company at 110-600 Barlow Square S.E., Calgary, AB T2C 5T7. Behr Paint Company reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.