BEHR PREMIUM® Concrete & Masonry Paint Stripper
For projects that need a fresh restart, use BEHR PREMIUM Concrete & Masonry Paint Stripper. This biodegradable stripper is ideal for removing multiple coats of paint, stain, epoxy, sealant and most industrial coatings. It works on masonry, metal, artificial stone and concrete, and it's ideal for both vertical and horizontal surfaces.
Finish
N/A
Best For Use In
Use on painted or stained Interior/Exterior, Vertical/Horizontal Concrete, Masonry, Artificial Stone, Brick and Metal Surfaces
Coverage
5-7 m2
PRODUCT USAGE
-
Coverage:
5-7 m2 -
Keep Surface Wet
During Use -
Soap & Water
Clean-Up
- Use on painted or stained Interior/Exterior, Vertical/Horizontal Concrete, Masonry, Artificial Stone, Brick and Metal Surfaces such as: Garage Floors, Driveways, Walkways, Patios, Pool/Cool Decks, Basement Floors and Concrete Walls.
- Removes coatings such as: stains, epoxies, urethanes, elastomeric, alkyds, sealants, latex and most industrial and architectural paints.
- DO NOT USE ON NATURAL STONES SUCH AS MARBLE, GRANITE, LIMESTONE, SLATE, SANDSTONE, FLAGSTONE, TRAVERTINE, ONYX, SOAPSTONE, TERRAZZO, COLOURED CONCRETE, BRASS, BRONZE or COPPER.
Preparation
- SHAKE WELL PRIOR TO USE.
- Pour BEHR PREMIUM CONCRETE & MASONRY PAINT STRIPPER N0. 992 into a paint tray or bucket. If water seems to have separated out, stir product until uniform.
- For vertical and glossy or greasy surfaces, scuff sand the surface lightly with a medium grit sand paper prior to application to prevent sagging of paint stripper.
- Test Patch: A test area will indicate the time required to lift coating and the suitability of the product for the paint and substrate.
- Protect grass and any nearby plants by dampening these areas with water and covering with plastic drop cloths.
- Prevent all rinse solution from entering storm drains.
Read More
Application
- Use product when air and surface temperatures are between 10-32°C.
- Wear protective clothing, goggles and acid resistant rubber gloves and boots. Use a NIOSH approved air purifying respirator with an organic vapour cartridge.
- Apply a thick layer of stripper onto the surface using a paintbrush or a stiff bristle broom to spread evenly. Completely cover original coated surface.
- Spread rate is approximately 6-7 m2
- Penetration varies according to coating type, thickness and temperature. COATING WILL WRINKLE WHEN THE JOB IS DONE. Most coatings will take between 1 – 6 hours to lift.
- Cheque periodically during the waiting period, to ensure that the coating is completely covered with the stripper. If the coated surface becomes visible again, re-apply a light coating.
- The stripper should remain wet and active until the coating wrinkles. If hot or windy conditions cause drying, re-apply a light coating.
- Use a scraper, squeegee or pressure washer to remove all coating and residue.
- The stripper is formulated to remove several layers of coating in one application. Some areas however, may require an additional application to remove all layers.
- The stripped surface must be rinsed with water thoroughly to remove all chemical residues before recoating.
- Allow surface to dry completely before recoating.
Read More
Disposal
- In case of contact with painted or finished surfaces, rinse immediately with fresh water. Product will damage automobile finishes.
- Properly dispose of old coating.
- To recycle or properly dispose of product in your community, contact your household refuse collection service.
Read More
To consult with a Behr Company Representative, call 1-800-661-1591.
Read More
Read More
Reviews
How-To
Find step-by-step instructions in our how-to articles and videos.
SDS AND DATA SHEET
BEHR PREMIUM® Concrete & Masonry Paint Stripper
See Full SDS, Product Data & SafetyWARRANTY
LIMITED WARRANTY: For one year from the date of purchase, Behr Paint Company warrants to the original consumer purchaser, (1) that the product meets Behr Paint Company manufacturing specifications, and (2) the performance of this product when applied according to the label instructions and specifications. If this product is found not to perform as specified on the label within one year from the date of purchase, Behr Paint Company will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. The clause of limitation of liability which follows is inapplicable in Quebec. This warranty excludes (1) labour and costs of labour for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. To the extent permitted by applicable law, any implied warranties including the implied warranties of merchantability and of fitness for a particular purpose, are limited to the duration of this express warranty. The above provisions are not intended to operate where prohibited by law. This limited warranty is the only warranty provided by Behr Paint Company unless extended by a provincial consumer statute. To obtain warranty service, call 1-800-661-1591, or contact Behr Paint Company at 110-600 Barlow Square S.E., Calgary, AB T2C 5T7. Behr Paint Company reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.
