BEHR® Multi-Surface Stain-Blocking Primer & Sealer
For a versatile primer that's excellent for stain-blocking, adhesion and sealing Interior/Exterior surfaces, choose BEHR® Multi-Surface Stain-Blocking Primer & Sealer. This 100% styrene acrylic formula resists medium to heavy stains, and can even be used on metal, aluminum and to cover old oil-based paint. It's also tintable, so it's great when you're looking to make a colour change. This is also a low odour, low VOC formula.
Finish
Dries to a non-reflective sheen which minimizes the appearance of minor surface imperfections.
Best For Use In
Over properly prepared uncoated and previously painted interior/exterior surfaces
Coverage
23-37 sq meters per 3.78L
PRODUCT USAGE
-
30 Min Dries to Touch
1 HR Ready to Topcoat -
23-37 m2
(250-400 Sq. Ft)
Coverage per 3.78L -
Soap & Water
Clean-Up -
Protect
from Freezing
- Over properly prepared uncoated and previously painted Interior/Exterior surfaces.
- Ideal for Masonry, Stucco, Drywall, Galvanized Metal, Ferrous Metals, Vinyl, Aluminum, Wood, Concrete and on glossy surfaces or oil-based paint.
- Bright or deep colours require a tinted primer.
- Have primer tinted close to topcoat colour with no more than 118 ml of colourant per 3.78L.
Preparation
- All surfaces should be properly prepared and cleaned.
- Remove loose paint, wash off chalk, dirt, and grease with detergent, rinse and allow to dry.
- Remove mildew stains with a mildew stain removing product.
- Scuff sand glossy and metal surfaces and repair imperfections.
- Remove all dust with a damp cloth, allow to dry.
- Allow new masonry stucco, concrete, concrete masonry units (CMUs), and split-faced block to cure for 7 days and test pH prior to applying primer.
- The pH must be 13.0 or lower before coating.
- Remove efflorescence with a mixed solution of one part vinegar and one part water, rinse thoroughly with clean water and allow to dry.
- FOR EXTERIOR SURFACES: For new or uncoated wood, use a product such as BEHR PREMIUM® No. 63 All-In-One Wood Cleaner.
- Etch galvanized metal with a concrete and masonry cleaner and etcher.
Read More
Application
- Apply when air and surface temperatures are between 2-32°C (35-90°F).
- Use a high quality 10 - 13 mm nap roller cover, nylon/polyester brush or an airless sprayer (.015-.021" spray tip, 60 mesh filter).
- Stir primer occasionally.
- Do not thin if using a roller or brush; however, if using a sprayer and thinning is required, thin with water at a rate of no more than 284 ml per 3.78L.
- Spot prime patched areas first, then follow with a complete primer coat.
- Two coats may be needed over heavy stains and tannin-rich wood.
- On stained surfaces, topcoat in 4 hours; for heavy stains, topcoat in 16 hours.
- Topcoat within 30 days.
Read More
Disposal
- For disposal of empty containers, unused paint and soiled rags, contact your household refuse collection service.
Read More
To consult with a Behr Company Representative, call 1-800-661-1591.
Read More
Read More
Reviews
Often Bought Together
How-To
Find step-by-step instructions in our how-to articles and videos.
SDS AND DATA SHEET
BEHR® Multi-Surface Stain-Blocking Primer & Sealer
See Full SDS, Product Data & SafetyWARRANTY
LIFETIME LIMITED WARRANTY: Behr Paint Company warrants to you, the original residential consumer purchaser, the performance of this product as described on this label for so long as you reside in your home. THIS WARRANTY IS NOT VALID WHEN THE PRODUCT IS NOT PROPERLY APPLIED TO A PROPERLY PREPARED SURFACE OR CARED FOR IN ACCORDANCE WITH THE LABEL DIRECTIONS. This warranty is not transferable. If this product is found not to perform as specified on the label during the warranty period, Behr Paint Company will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. The clause of limitation of liability which follows is inapplicable in Quebec: This warranty excludes (1) labour and costs of labour for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. To the extent permitted by applicable law, any implied warranties including the implied warranties of merchantability and of fitness for a particular purpose, are limited to the duration of this express warranty. The above provisions are not intended to operate where prohibited by law. This limited warranty is the only warranty provided by Behr Paint Company unless extended by a provincial consumer statute. To obtain warranty service, call 1-800-661-1591 or contact Behr Paint Company at 110-600 Barlow Square S.E., Calgary, AB T2C 5T7. Behr Paint Company reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.
