BEHR PREMIUM™ Metallic SPRAY PAINT

Avg. Rating:

BEHR PREMIUM™ Metallic Spray Paint delivers a beautiful metal plated look to your indoor and outdoor projects. This luxurious and bold finish enhances kitchen and bath accents, craft décor and outdoor accessories, bringing your small projects to life. With an ergonomically shaped spray can, BEHR PREMIUM Metallic Spray Paint is easy and comfortable to use and provides a durable finish that helps protect against weather and rust.


Finish

Gloss, Satin or Matte Finish

Best For Use In

Designed for both indoor and outdoor use. BEHR PREMIUM™ Metallic Spray Paint can be used on wood, metal, plastic, cast stone, and more.

Coverage

1 to 1.4 m2 per can

VOTED THE BEST NEW PAINT PRODUCT BY CONSUMERS*

BEHR PREMIUM™ Specialty Spray Paint

*Rated the Best New Product for Paint by Canadians in a 2024 BrandSpark® survey. The Best New Product Awards logo is a trademark of Best New Product Awards Inc., used under license.

PRODUCT USAGE

Use on properly prepared surfaces such as:

  • Wood
  • Metal 
  • Plastic
  • Cast stone
  • Wicker

Preparation

  • The surface must be clean, free of dust, grease, wax, peeling paint, mold or mildew. If washing is necessary, use a non-soapy detergent or a TSP substitute. Rinse well and allow to dry.
  • Peeling or Checked Paint: Scrape off loose paint and sand to a smooth surface. Sanding or removal of paint containing lead is hazardous.

†WARNING! If you scrape, sand, or remove old paint, you may release lead dust. LEAD IS TOXIC. Contact Health Canada at 1-866-225-0709 or log on to www.canada.ca/en/health-canada/services/home-safety/lead-based-paint.

Read More

Application

  • Eye protection is recommended.
  • For best results, use at room temperature. Cover adjacent areas to protect from overspray.
  • Shake can vigorously for 1 minute after mixing ball begins to rattle and often during use. Hold can upright, moving from side-to-side while spraying lightly and evenly about 20-30 cm (8"-12") from area being painted.
  • Apply thin coats to avoid runs and sags. Recoat within 1 hour or after 24 hours.
  • Dries to touch in 15-30 min. Cooler temperatures or higher humidity may prolong drying time.
  • Use BEHR® Primer for enhanced adhesion over bare wood and metal.

Read More

Clean-up & Disposal

  • Clear spray valve immediately after use by turning can upside down and spraying until only clear gas is released. If spray nozzle becomes clogged, remove and clean.
  • Do not stick pins or wire into can opening.
  • Clean fresh overspray with mineral spirits or paint thinner. Remove dried paint with paint remover, but test small area first to ensure paint remover does not damage substrate.
  • Please consider donating any unused product. For recycling or disposal information contact your local household refuse collection service.

Read More

Read More

Reviews

WARRANTY

For one year from the date of purchase, Behr Process LLC warrants to the original consumer purchaser, (1) that the product meets Behr Process LLC’s manufacturing specifications, and (2) the performance of this product when applied according to the label instructions and specifications. If this product is found not to perform as specified on the label within one year from the date of purchase, Behr Process LLC will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. The clause of limitation of liability which follows is inapplicable in Québec. THIS WARRANTY EXCLUDES (1) LABOUR AND COSTS OF LABOUR FOR THE APPLICATION OR REMOVAL OF ANY PRODUCT, AND (2) ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES, WHETHER BASED ON BREACH OF EXPRESS OR IMPLIED WARRANTY, NEGLIGENCE, STRICT LIABILITY OR ANY OTHER LEGAL THEORY. TO THE EXTENT PERMITTED BY APPLICABLE LAW, ANY IMPLIED WARRANTIES INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND OF FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THIS EXPRESS WARRANTY. The above provisions are not intended to operate where prohibited by law. This limited warranty is the only warranty provided by Behr Process LLC unless extended by a provincial consumer statute. To obtain warranty service, call 1-800-661-1591, or contact Behr Process LLC at 110-600 Barlow Square S.E., Calgary, AB T2C 5T7. Behr Process LLC reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.