Warm summer evenings lend to more entertaining outside, making this the perfect time to spruce up your outdoor space with BEHR PREMIUM™ Spray Paint.
Featured Colours & Products:
- Oil-Rubbed Bronze SP-201, Metallic Satin Finish
- White 52, Gloss Finish
- Breezeway MQ3-21, Satin Finish
Materials:
- Spray Paint:
- Table Legs: BEHR PREMIUM™ Spray Paint, Oil Rubbed Bronze SP-201, Metallic Satin Finish
- Tabletop: BEHR PREMIUM™ Spray Paint, White 52, Gloss Finish
- Stencil: BEHR PREMIUM™ Spray Paint, Breezeway MQ3-21, Satin Finish
- Painter’s Tape
- Medium Grit Sandpaper or Sanding Block
- Large Sponge
- Protective Glasses and Mask
- Gloves
- Drop Cloth
Tip: Always wear appropriate protective gear.
Check out the how-to video or follow the steps below:
Step 1
Prep
Scuff sand to remove any loose paint and wipe away debris. Clean the table and allow to dry.
Tape off and cover the top to avoid overspray.
Step 2
Apply Spray Paint
Set up outside or in a well-ventilated area. Cover the floor and any areas around you that you do not want spray paint on.
Shake the can vigorously for 1 minute. Hold can about 30 cm (12”) from area being painted. While spraying, move can from side to side across the area. Let dry at least 1 hour before applying a second coat. Two to three thin coats produce the best results.
Once dry, cover the legs and spray the tabletop. Let dry completely before the next step.
Tip: Shake often during use.
Step 3
Add Stencil Design
Secure the stencil to your tabletop with painter’s tape. Apply spray paint (refer to step 2). Carefully remove the stencil immediately after spraying.
Tip: You can use a small paint brush with spray paint for touch ups.
To complete this look, we spray painted the chairs and small table and added a few decorative pillows.
BEHR PREMIUM™ Spray Paint can be used to create unique and trendy looks in your home. For additional inspiration on BEHR decorative finishes, visit behr.ca.
Colourfully yours,
Larayne
